Process Design Method of High Speed and Stable Cutting Hardened Steel

نویسندگان

  • Jiang Bin
  • Zhang Wei
چکیده

In view of the unstable cutting problem in the process of high speed milling hardened steel. Conduct experiment of the stability of machine tool and high speed milling cutter. The machine tool spindle vibration spectrum and vibration acceleration signal under the condition of different centrifugal force were detected. Obtained the critical speed of security and stability cutting of milling cutter and machine tool spindle. Through the experiment of concave and convex surface of hardened steel high speed milling, obtained the vibration characteristic of machine tool spindle and the shape characteristic of machined surface of hardened steel concave and convex surface. Comparative analysis the experimental results of milling cutter free running and milling hardened steel under the same speed condition. Recognizing the significant effect of inherent vibration characteristics of machine tool to the stability of the hardened steel high speed milling. With the aim of achieving stable and efficient cutting of hardened steel, put forward process design method of high speed milling hardened steel. Using this process design method, obtained the process scheme of high efficient and stability cutting hardened steel die. Process validation results show, the stability of the high speed milling concave convex die of hardened steel improved over 33%.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Study & Modeling of Surface Roughness in Turning of Hardened AISI 4340 Steel Using Coated Carbide Inserted

Turning of hardened steels using a single point cutting tool has replaced the cylindrical grinding now as it offers attractive benefits in terms of lower equipment costs, shorter set up time, fewer process setups, higher material removal rate, better surface quality and elimination of cutting fluids compared to cylindrical grinding. In order to obtain desired surface quality by machining, pr...

متن کامل

Surface Roughness, Machining Force and FlankWear in Turning of Hardened AISI 4340 Steel with Coated Carbide Insert: Cutting Parameters Effects

The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI 4340 steel with multilayer CVD (TiN/TiCN/Al2O3) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) ar...

متن کامل

Finite Element Simulation and Experiment of Chip Formation Process during High Speed Machining of AISI 1045 Hardened Steel

As an advanced manufacturing technology which has been developed rapidly in recent years, high speed machining is widely applied in many industries. The chip formation during high speed machining is a complicated material deformation and removing process. In research area of high speed machining, the prediction of chip morphology is a hot and difficult topic. A finite element method based on th...

متن کامل

Experimental Study of the Cutting Parameters Effect on Hole Making Processes in Hardened Steel

Hardened steels are commonly used in wide areas of technologies and industries. In respect of poor machinability of these steels and requirement of expensive cutting tools, study of machining economy is a matter of importance. Thus the present study deals with the economic considerations of various hole making processes. For this purpose, the hard steel samples were machined by conventional dri...

متن کامل

Experimental Study of the Cutting Parameters Effect on Hole Making Processes in Hardened Steel

Hardened steels are commonly used in wide areas of technologies and industries. In respect of poor machinability of these steels and requirement of expensive cutting tools, study of machining economy is a matter of importance. Thus the present study deals with the economic considerations of various hole making processes. For this purpose, the hard steel samples were machined by conventional dri...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015