Detection of Combustion Properties in a Diesel Engine Using Block Mounted Accelerometers
نویسندگان
چکیده
Engine block mounted accelerometers was used for estimating combustion phasing parameters for a heavy duty diesel engine. Several sensor locations were evaluated for its sensitivity to combustion related vibrations and mechanical noise. One sensor-cylinder combination was selected for the evaluation of a simple algorithm to detect 10% and 50% burned mass fraction. The algorithm uses the accumulated accelerometer vibration energy as a base for extracting the 10% and 50% points respectively. The results show that the angular positions for 10% and 50% burned mass fraction can be estimated with precisions of 1.5 and 3 CAD respectively. It is also concluded that the early part of the accelerometer signal has a significant influence from a mechanical noise source related to the start of injection.
منابع مشابه
Development of balance shaft and flywheel for single cylinder diesel engine based on analytical approach and comparison with the simulation result
Vibration is a key factor of abrasion and destruction in the internal combustion engine. In internal combustion engines, the main causes of vibration is combustion pressure, connecting rod weight, piston weight and inertial forces. This vibration create corrosion and fracture in main part of engine such as crankshaft, camshaft and cylinder block in long time. This corrosion and fracture is effe...
متن کاملA review of thermal barrier coating effects on diesel engine performance and components lifetime
In the present paper, a complete literatures review of thermal barrier coating applications in diesel engines is performed to select a proper type and to find coating effects. The coating system has effects on the fuel consumption, the power and the combustion efficiency, pollution contents and the fatigue lifetime of engine components. Usually there are several beneficial influences by appl...
متن کاملCombustion Modeling for Modern Direct Injection Diesel Engines
In order to comply with stringent pollutant emissions regulations, a detailed analysis of the engine combustion and emission is required. In this field, computational tools like CFD and engine cycle simulation play a fundamental role. Therefore, the goal of the present work is to simulate a high speed DI diesel engine and study the combustion and major diesel engine emissions with more deta...
متن کاملNumerical study of the effect of fuel injection timing on the ignition delay, performance parameters and exhaust emission of gas/dual fuel diesel engine using Computational Fluid Dynamics
Today, due to the various usage of compression ignition engines in urban transportation, as well as the need to reduce exhaust emissions and control fuel consumption, the use of alternative fuels has become common in diesel engines. Gaseous fuel is one of the most common alternative fuels that can be used in diesel engines. The utilization of alternative fuels in compression ignition engines re...
متن کاملModeling of Combustion and Carbon Oxides Formation in Direct Injection Diesel Engine
When looking at the effects of diesel engine exhaust on the environment, it is important to first look at the composition of the exhaust gases. Over 99.5% of the exhaust gases are a combination of nitrogen, oxygen, carbon dioxide, and water. With the exception of carbon dioxide, which contributes about 5% of the total volume, the diesel engine exhaust consists of elements which are part of...
متن کامل