Design and Research of Piezoelectric Ceramics Drive Power
نویسندگان
چکیده
Piezoelectric amplifier is a very important part of the piezoelectric actuator. It does not only require high positioning accuracy, but also high frequency response. This paper designs the error amplifier drive power consisting of high-voltage op amp and discrete components, consisting of an error-amplified circuit, a power amplifier circuit, a feedback network and a discharge circuit. A compensation technique based on feedback zero compensation is proposed and it increases the frequency bandwidth and dynamic characteristics of the PZT power effectively. Through the power of the theoretical analysis and Multisim software simulation, the power supply has a good drive capability. Copyright © 2014 IFSA Publishing, S. L.
منابع مشابه
ERRATUM Power harvesting with PZT ceramics and circuits design
Power generated from a piezoelectric material usually comes with poor characteristics such as high voltage, low current and high impedance. In order to drive the embedded sensor circuit, piezoelectric power needs to be characterized and regulated. In this paper, we present an analysis on the power generation characteristics and the efficiency of power conversion of the stiff lead zirconate tita...
متن کاملPiezoelectric Energy Harvesting
The piezoelectric material selection and the circuit design in vibrational energy harvesting are discussed. The performances of the energy-harvesting unimorph devices that captured frequencies of 60 Hz by using piezoelectric PZT-based and BT-based ceramics were evaluated. Output voltages and power from the devices depend on the amplitude and the frequency of the oscillations, and depend on the ...
متن کاملDesign and Fabrication of Ultralight High-Voltage Power Circuits for Flapping-Wing Robotic Insects
Flapping-wing robotic insects are small, highly maneuverable flying robots inspired by biologicalinsects and useful for a wide range of tasks, including exploration, environmental monitoring, searchand rescue, and surveillance. Recently, robotic insects driven by piezoelectric actuators have achievedthe important goal of taking off with external power; however, fully autonomous operation requir...
متن کاملHigh Temperature, High Power Piezoelectric Composite Transducers
Piezoelectric composites are a class of functional materials consisting of piezoelectric active materials and non-piezoelectric passive polymers, mechanically attached together to form different connectivities. These composites have several advantages compared to conventional piezoelectric ceramics and polymers, including improved electromechanical properties, mechanical flexibility and the abi...
متن کاملAnalysis of 1-3 Piezocomposite and Homogeneous Piezoelectric Rings for Power Ultrasonic Transducers
Some power ultrasonic transducers, such as Tonpilz transducers, require high-power transmitting capability as well as broadband performance. Optimized vibrational modes can achieve these requirements. This work compares the resonant characteristics and the surface vibration modes between a homogeneous piezoelectric ring and a 1-3 piezocomposite ring, both used in power ultrasonic transducers. T...
متن کامل