Solvent-annealing-induced self-organization of poly(3-hexylthiophene), a high-performance electrochromic material.

نویسندگان

  • Jen-Hsien Huang
  • Chuan-Yi Yang
  • Chih-Yu Hsu
  • Cheng-Lun Chen
  • Lu-Yin Lin
  • Rui-Ren Wang
  • Kuo-Chuan Ho
  • Chih-Wei Chu
چکیده

We have systematically studied the self-organization of poly(3-hexylthiophene) (P3HT), an electrochromic material, upon control of the solvent evaporation rate. We characterized these polymer films using atomic force microscopy and X-ray diffraction measurements. Well-ordered P3HT structures were developed after solvent annealing; these highly crystalline structures exhibited enhanced electrochromic contrast and reduced resistance within the film, leading to larger coloration efficiencies and faster switching times. The optical contrast (Delta%T), coloration efficiency, and switching time of the P3HT films increased from 54.2%, 182.6 cm(2) C(-1), and 5.3 s, respectively, prior to solvent annealing to 64.8%, 293.5 cm(2) C(-1), and 3.2 s, respectively, after application of the solvent-annealing conditions.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

High Efficiencies in Nanoscale Poly(3-‎Hexylthiophene)/Fullerene Solar Cells

   A modified morphology was introduced for poly(3-hexylthiophene):phenyl-C71-butyric acid methyl ester (P3HT:PC71BM) bulk heterojunction (BHJ) solar cells by thermal and solvent annealing treatments in the presence of hydrophilic-hydrophobic block copolymers. Power conversion efficiency (PCE) plummet was prohibited during both thermal and solvent treatments for all BHJ devices modified wit...

متن کامل

Annealing effects on the photovoltaic performance of all-conjugated poly(3-alkylthiophene) diblock copolymer-based bulk heterojunction solar cells.

The effects of thermal and solvent vapor annealing on the photovoltaic performance of a new class of all-conjugated poly(3-butylthiophene)-b-poly(3-hexylthiophene) diblock copolymer/PC(71)BM bulk heterojunction (BHJ) solar cells were scrutinized and theoretically analyzed using the single diode model combined with experimental measurements. The meanings of physical parameters in the model were ...

متن کامل

Synthesis and self-assembly of poly(3-hexylthiophene)-block-poly(acrylic acid).

A modular and convenient synthesis of ethynyl end functionalized poly(3-hexylthiophene) in high purity is reported; this material facilitated access to poly(3-hexylthiophene)-block-poly(acrylic acid) which self-assembled into hierarchical structures.

متن کامل

Effect of thermal cycling on performance of Poly(3-hexylthiophene) Transistors

We present the results of studies on the electrical and physical modifications to Poly(3hexylthiophene), upon thermal annealing. Thermally-induced performance modifications and thermal stability of polythiophene thin film transistors are explored. We observe substantial mobility improvements in devices annealed at low temperatures (<80°C), as well as increases in on/off ratios by two orders of ...

متن کامل

Two-dimensional MoS2-assisted immediate aggregation of poly-3-hexylthiophene with high mobility.

Nanoscale morphology is of significance to the electronic properties of semiconducting polymers. Solution-processed poly-3-hexylthiophene (P3HT) has been demonstrated as a promising active-layer material in organic thin film transistors (OTFTs) and solar cells. Controlling the crystallinity of P3HT chains is critical for gaining high-performance devices. Here we demonstrated the immediate cryst...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • ACS applied materials & interfaces

دوره 1 12  شماره 

صفحات  -

تاریخ انتشار 2009