Shear bands due to heat flux prescribed at boundaries
نویسندگان
چکیده
We analyze the initiation and development of a shear band in a thermo-elasto-viscoplastic body deformed in simple shear by tangential velocity and heat flux prescribed at the outer bounding surfaces. Unlike previous studies no defect is introduced to initiate a shear band. The prescribed heat flux acts as a defect, and the shear band initiation time depends upon it. 2005 Elsevier Ltd. All rights reserved.
منابع مشابه
An Analytical Approach to the Effect of Viscous Dissipation on Shear-Driven Flow between two parallel plates with Constant Heat Flux Boundary Conditions
An investigation has been made to analyze the effects of viscous dissipation on the heat transfer characteristics for both hydro-dynamically and thermally fully developed, laminar shear driven flow between two infinitely long parallel plates, where the upper plate is moving in an axial direction at a constant speed. On the basis of some routine assumptions made in the literature, a close form a...
متن کاملEffect of NOCOLOK® flux dry-off temperature on brazed joint strength of aluminum-based heat exchangers
During the brazing of aluminum-based heat exchangers, the flux dry-off temperature plays a crucial role to get sound joints with maximum strength. In the present study, the NOCOLOK® flux consists of two phases of K2AlF5.H2O and KAlF4 with a melting point around 580 °C was used for brazing AA3003 as base metal with a clad-coating of AA4343 as filler metal. The slurry was applied on the joints an...
متن کاملEffect of NOCOLOK® flux dry-off temperature on brazed joint strength of aluminum-based heat exchangers
During the brazing of aluminum-based heat exchangers, the flux dry-off temperature plays a crucial role to get sound joints with maximum strength. In the present study, the NOCOLOK® flux consists of two phases of K2AlF5.H2O and KAlF4 with a melting point around 580 °C was used for brazing AA3003 as base metal with a clad-coating of AA4343 as filler metal. The slurry was applied on the joints an...
متن کاملAnalysis of Shear Bands in Dynamic Axisymmetric Compression of a Thermoviscoplastic Cylinder
Abstract-We study dynamic axisymmetric thermomechanical deformations of a viscoplastic cylinder with its boundaries assumed to be thermally insulated, its mantle traction free, and its top and bottom surfaces compressed at a prescribed rate. We consider two limiting cases of the frictional force between the loading device and the cylinder, i.e. either there is no sliding between the two surface...
متن کاملHeat Transfer over a Stretching Porous Sheet Subjected to Power Law Heat Flux in Presence of Heat Source
In the present investigation the boundary layer steady flow and heat transfer of a viscous incompressible fluid due to a stretching porous sheet in presence of heat source are studied. The equations of motion and heat transfer are reduced to non-linear ordinary differential equations and the exact solutions are obtained in the form of confluent hypergeometric function (Kummer’s Function) for pr...
متن کامل