Change in physico-mechanical and thermal properties of polyamide / silica nanocomposite film
نویسندگان
چکیده
In this work, polyamide (PA)/silica nanocomposite films prepared by dissolution method of composite mixing were investigated. The morphology of nanocomposite films were characterized using scanning electron microscope (SEM), reveals that nano silica powder were uniformly dispersed on PA silica nanocomposite film. Chemical composition of film was confirmed by Fourier transform infrared spectroscopy (FTIR). The nanocomposite films obtained from dissolution mixing exhibited an increasing tensile strength with an increase in silica content. Thermal behavior of the film were evaluated by DSC, revels that incorporation of silica nano particles in PA film increased the enthalpy (ΔH) value of the film compared to the pure polyamide film.
منابع مشابه
Polyester/SiO2 Nanocomposites: Gas Permeation, Mechanical, Thermal and Morphological Study of Membranes
Using of nanocomposite membranes composed of polymer and inorganic nanoparticles is a novel method to enhance gas separation performance. In this study, membranes were fabricated from polyester (PE) containing silica (SiO2) nanoparticles and gas permeation properties of the resulting membranes were investigated. Morphology of the membranes, SiO2 distribution a...
متن کاملPLA-SiO2 nanocomposite films: morphological and mechanical properties and specific end-use characteristics
Objective(s): Application of eco-friendly materials like poly lactic acid (PLA) is increasing, to reduce environmental pollutions. In this research, the effect of silicon dioxide 1%, 3% and 5% nanoparticles on morphological, mechanical and chemicals interaction (FTIR) of PLA film was studied. Materials and Methods: Scanning electron microscope (SEM) was used, ...
متن کاملRheological, thermal and tensile properties of PE/nanoclay nanocomposites and PE/nanoclay nanocomposite cast films
The effects of three different mixers, two different feeding orders and nanoclay content on the structure development and rheological properties of PE/nanoclay nanocomposite samples were investigated. Fractional Zener and Carreau–Yasuda models were applied to discuss the melt linear viscoelastic properties of the samples. Moreover, scaling law for fractal networks was used to quantify clay disp...
متن کاملEffect of carbon black and fly ash co-fillers content on mechanical and thermal behaviors of styrene butadiene rubber compounds
Fly ash (FA) is produced as a waste byproduct during the burning process of coal in thermal power plants whose cost is primarily associated to cleaning and transportation. It possesses mechanical properties on account of its constituents like silica and alumina. The use of FA as filler in styrene butadiene rubber (SBR) was of researchers’ interest to reinforce and/or to reduce product cost. In ...
متن کاملRole of Nano-Sized TiO2 on Mechanical and Thermal Behavior of Starch/Poly (vinyl alcohol) Blend Films
A novel Starch/Poly (vinyl alcohol)/nano-Titanium dioxide (ST/PVA/nano-TiO2) biodegradable nanocomposite film was prepared by homogeneously dispersed TiO2 nanoparticles in different ratios of starch/PVA-based materials, via a solution casting method. Glycerol was used as plasticizer. The mechanical and thermal properties of films were studied using tensile and perforation strength tests and the...
متن کامل