Safety assessment of Tin(IV) oxide as used in cosmetics.
نویسندگان
چکیده
Tin(IV) oxide functions as an abrasive, bulking, and opacifying agent in cosmetic products and is used at concentrations up to 0.4% in rinse-off products and up to 1.3% in leave-on products. The Cosmetic Ingredient Review Expert Panel (Panel) noted that tin(IV) oxide is a water-insoluble inorganic metal compound and should not be percutaneously absorbed; therefore, systemic exposure is not likely. Studies of dermal application of tin(IV) oxide were considered to determine toxicity at the site of application. The Panel concluded that tin(IV) oxide is safe in the present practices of use and concentration.
منابع مشابه
Safety Assessment of Alumina and Aluminum Hydroxide as Used in Cosmetics.
This is a safety assessment of alumina and aluminum hydroxide as used in cosmetics. Alumina functions as an abrasive, absorbent, anticaking agent, bulking agent, and opacifying agent. Aluminum hydroxide functions as a buffering agent, corrosion inhibitor, and pH adjuster. The Food and Drug Administration (FDA) evaluated the safe use of alumina in several medical devices and aluminum hydroxide i...
متن کاملFinal Report of the Cosmetic Ingredient Review Expert Panel Safety Assessment of Silica and Related Cosmetic Ingredients
This is a safety assessment of silica and the related cosmetic ingredients: alumina magnesium metasilicate, aluminum calcium sodium silicate, aluminum iron silicates, hydrated silica, and sodium potassium aluminum silicate. These ingredients are synthetic amorphous silicas and silicates; crystalline silica is not a cosmetic ingredient and is not used in cosmetics. These ingredients are used as ...
متن کاملSynthesis and Spectroscopic Characterization of Some New Coordination Compounds of Organotin (IV) with Carbohydrazones
Some new coordination compounds of tin(IV) having general formula [SnBu2 (L)2 ] (where L = carbohydrazone ligand) have been synthesized by the reaction of dibutyltin oxide with carbohydrazone ligands with the ratio of 1:2 (metal- ligand) using dry benzene as a reaction medium. The newly synthesized complexes were characterized by elemental analysis, molecular weight determinations, conductivity...
متن کاملبررسی روند تشکیل ترکیبات اکسیدی در آثار برنزی با استناد به مطالعات میکروسکوپی
Due to the complex corrosion mechanism of the bronze objects, explaining the structure of different layers of corrosion in these objects at microscopic levels is possible. Typically copper oxide(I) is the first corrosion layer on surface of bronze objects that are excavated of historical sites. However, depending on the environmental conditions، various forms of corrosion layer of tin or copper...
متن کاملInvestigation of the electrical properties and corrosion resistance of TiN coating deposited by reactive sputtering on the titanium bipolar plate, used in polymeric fuel cell
The effect of titanium nitride film on the properties of titanium bipolar plates used in polymeric fuel cell was investigated in this research. TiN coatings was deposited on the Ti-grade 1 substrate by using DC-sputtering method. Pure titanium was used as target and coating deposition was done in argon and nitrogen atmosphere. Different TiN thickness was developed by changing sputtering time. T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- International journal of toxicology
دوره 33 4 Suppl شماره
صفحات -
تاریخ انتشار 2014