Trend and Challenge on System-on-a-Chip Designs
نویسندگان
چکیده
The success of system-on-a-chip (SoC) hinges upon a wellconcerted integrated approach from multiple disciplines, such as device, design, and application. From the device perspective, rapidly improving VLSI technology allows the integration of billions of transistors on a single chip, thus permitting a wide range of functions to be combined on one chip. From the application perspective, numerous killer applications have been identified, which can make full use of the aforementioned functionalities provided by a single chip. From the design perspective, however, with greater device integration, system designs become more complex and are increasingly challenging to design. Moving forward, novel approaches will be needed to meet these challenges. This paper explores several new design strategies, which represent the current design trends to deal with the emerging issues. For example, recognizing the stringent requirements on power consumption, memory bandwidth/latency, and transistor variability, novel power/thermal management, multi-processor SoC, reconfigurable logic, and design for verification and testing have now been incorporated into modern system design. In addition, we look into some plausible solutions. For example, further innovations on scalable, reusable, and reliable system architectures, IP deployment and integration, on-chip interconnects, and memory hierarchies are all anticipated in the near future.
منابع مشابه
Numerical Study on Low Reynolds Mixing ofT-Shaped Micro-Mixers with Obstacles
Micromixers are one of the most crucial components of Lab-On-a-Chip devices with the intention of mixing and dispersion of reagents like small molecules and particles. The challenge facing micromixers is typically insufficient mixing efficiency in basic designs, which results in longer microchannels. Therefore, it is desirable to increase mixing efficiency, in order to decrease mixing length, w...
متن کاملReliability and Performance Evaluation of Fault-aware Routing Methods for Network-on-Chip Architectures (RESEARCH NOTE)
Nowadays, faults and failures are increasing especially in complex systems such as Network-on-Chip (NoC) based Systems-on-a-Chip due to the increasing susceptibility and decreasing feature sizes. On the other hand, fault-tolerant routing algorithms have an evident effect on tolerating permanent faults and improving the reliability of a Network-on-Chip based system. This paper presents reliabili...
متن کاملCAFT: Cost-aware and Fault-tolerant routing algorithm in 2D mesh Network-on-Chip
By increasing, the complexity of chips and the need to integrating more components into a chip has made network –on- chip known as an important infrastructure for network communications on the system, and is a good alternative to traditional ways and using the bus. By increasing the density of chips, the possibility of failure in the chip network increases and providing correction and fault tol...
متن کاملEditor in Chief's Message: Saving power-Lessons from embedded systems
How important is the processor core these days? This is a question on the minds of microarchitects, designers, and researchers in our field. And, it is a question (or is it a concern) that is not that new, either. It is at least as old as the days when we started grappling with issues such as the memory wall problem. Processor-level architects have long used (or goteen used to) the admonition, ...
متن کاملImpact of CMP Design on High-Performance Embedded Computing
Chip multiprocessors (CMPs) will dominate commercial processor designs for at least the next decade, during which we will likely see an annual doubling of the number of processor cores integrated onto a single chip. This trend is expected in both desktop and server processors, as well as within high-performance embedded systems where, in fact, the phenomenon first appeared. Both Intel’s IXP net...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Signal Processing Systems
دوره 53 شماره
صفحات -
تاریخ انتشار 2008