Photovoltaic Prickle Pear Harvesting Tool

نویسنده

  • Federico Hahn
چکیده

Mexico is the largest cactus exporter of the world and 40% of the production cost is provided from the harvest operation. Many workers are required to operate daily and suffer wrist pain after two weeks of collecting pears with mechanical pruners. A motor driven tool supplied from a photovoltaic system was employed for harvesting; different blades were tested at different cutting speeds. It was found that toothed blades sliced the pears with efficiencies over 90%. Abrasive blades were finally selected as the current required per cut was minimum, permitting a longer battery lifetime before requiring recharging.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Proposal for Automatic Fruit Harvesting by Combining a Low Cost Stereovision Camera and a Robotic Arm

This paper proposes the development of an automatic fruit harvesting system by combining a low cost stereovision camera and a robotic arm placed in the gripper tool. The stereovision camera is used to estimate the size, distance and position of the fruits whereas the robotic arm is used to mechanically pickup the fruits. The low cost stereovision system has been tested in laboratory conditions ...

متن کامل

Reconfigurable Photovoltaic Array Systems for Adaptive and Fault-Tolerant Energy Harvesting

© Springer Science+Business Media Dordrecht 2016 C.-M. Kyung (ed.), Nano Devices and Circuit Techniques for Low-Energy Applications and Energy Harvesting, KAIST Research Series, DOI 10.1007/978-94-017-9990-4_6 Abstract This chapter introduces a reconfigurable photovoltaic (PV) cell array for adaptive and fault-tolerant energy harvesting in view of component modeling, architectures, properties, ...

متن کامل

Autonomous Temperature Sensor Based on a Photovoltaic Energy Harvesting System

In this paper we present an autonomous temperature sensor supplied by a on chip photovoltaic energy harvester. Then system is realized in a BCD SOI technology. The energy harvesting elements consist of a 34 trench-insulated p-n junctions, while the sensing system consists of a bandgap reference circuit, including an integrated high precision temperature sensor, and a high voltage low drop-out v...

متن کامل

Analytical model of Graphene based antenna for energy harvesting applications

Recent advances in fabrication and characterization of nanomaterials have led to the intelligible applications of such nanomaterials in the next generation flexible electronics and the highly efficient photovoltaic devices. Nanotechnology has been used in thin film photovoltaic devices, and is considered as one of the most promising research area in power harvesting applications. Excellent elec...

متن کامل

Bulk heterojunction photovoltaic cells based on tetra-methyl substituted copper(II) phthalocyanine:P3HT:PCBM composite.

Insoluble CuMePc nanocrystals were incorporated into P3HT:PCBM bulk heterojunction photovoltaic cells to increase the carrier mobility and photon harvesting. The P1C1-based (weight ratio of P3HT: CuMePc = 1:1) OPV cell exhibited the best photovoltaic performance with a J(SC) of 16.3 mA cm(-2), V(OC) of 0.58 V, FF of 0.56 and PCE of 5.3%.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013