Improving IMES Localization Accuracy by Integrating Dead Reckoning Information
نویسندگان
چکیده
Indoor positioning remains an open problem, because it is difficult to achieve satisfactory accuracy within an indoor environment using current radio-based localization technology. In this study, we investigate the use of Indoor Messaging System (IMES) radio for high-accuracy indoor positioning. A hybrid positioning method combining IMES radio strength information and pedestrian dead reckoning information is proposed in order to improve IMES localization accuracy. For understanding the carrier noise ratio versus distance relation for IMES radio, the signal propagation of IMES radio is modeled and identified. Then, trilateration and extended Kalman filtering methods using the radio propagation model are developed for position estimation. These methods are evaluated through robot localization and pedestrian localization experiments. The experimental results show that the proposed hybrid positioning method achieved average estimation errors of 217 and 1846 mm in robot localization and pedestrian localization, respectively. In addition, in order to examine the reason for the positioning accuracy of pedestrian localization being much lower than that of robot localization, the influence of the human body on the radio propagation is experimentally evaluated. The result suggests that the influence of the human body can be modeled.
منابع مشابه
GridiLoc: A Backtracking Grid Filter for Fusing the Grid Model with PDR Using Smartphone Sensors
Although map filtering-aided Pedestrian Dead Reckoning (PDR) is capable of largely improving indoor localization accuracy, it becomes less efficient when coping with highly complex indoor spaces. For instance, indoor spaces with a few close corners or neighboring passages can lead to particles entering erroneous passages, which can further cause the failure of subsequent tracking. To address th...
متن کاملBearing-Only SLAM using Colour-based Feature Tracking
This paper presents identifies and addresses the difficulties that arise from implementing visual information into the Simultaneous Localization and Mapping (SLAM) problem, with an emphasis for outdoor applications. Through identifying these problems, techniques for integrating the visual & navigation are proposed with results from their preliminary applications. Video data is gathered through ...
متن کاملA New Approach to Self-Localization for Mobile Robots Using Sensor Data Fusion
This paper proposes a new approach for calibration of dead reckoning process. Using the well-known UMBmark (University of Michigan Benchmark) is not sufficient for a desirable calibration of dead reckoning. Besides, existing calibration methods usually require explicit measurement of actual motion of the robot. Some recent methods use the smart encoder trailer or long range finder sensors such ...
متن کاملUse of Range Sensor Information for Improving Positioning Accuracy
Range sensors are commonly used for mobile robots in order to avoid collision with obstacles and build an environmental map. Unless the robot uses an external localization device, the deadreckoning alone incurs the accumulated position errors. This paper presents an algorithm for the position error correction. Edges and nodes are identified from the range sensor information; using the identifie...
متن کاملPosition Determination Using Landmark Localization for a Mobile Robot
An artificial landmark-based, automatic navigation system was developed for a small-scale field robot. Several low-cost sensing techniques were involved in the system to detect surroundings and determine the position of the moving robot. Several tests were conducted to evaluate the accuracy of linear distance and angular displacement using dead-reckoning with a gyro-correction, overall performa...
متن کامل