Adaptive control for a multi-axis hydraulic test rig
نویسنده
چکیده
Multi-axis hydraulic rigs are widely used in industrial testing applications but still represent a challenging area for control system design. The current paper considers the control of a six-degrees-of-freedom multi-axis shaking table driven by six hydraulic actuators. The strategy adopted employs adaptive decentralized position control, i.e. each axis has its own adaptive controller. The scheme developed is based on a cascade minimal control synthesis (MCS) approach, which is a class of model reference adaptive control (MRAC). The theoretical background to the controller is presented, together with the results of an experimental study. Performance is compared with three other fixed-gain control schemes. The new adaptive scheme has superior disturbance rejection and command tracking capabilities.
منابع مشابه
A novel pitch control system for a wind turbine driven by a variable-speed pump-controlled hydraulic servo system
The paper aims to develop a novel pitch control system for a large wind turbine driven by a variable-speed pump-controlled hydraulic servo system. To perform practical pitch control experiments, a full-scale test rig of the hydraulic pitch control system for a 2 MW wind turbine’s blade, including a novel pitch control mechanism, a variable-speed pump-controlled hydraulic servo system, a disturb...
متن کاملOverview of wave energy converter devices and the development of a new multi-axis laboratory prototype
The first part of the article provides an overview of both single-axis and multi-axis wave energy converter (WEC) technology, with a particular focus on present and past prototype devices. The second part of the article considers a multi-axis concept device that has been developed and tank tested at Lancaster University by successive Master of Engineering project teams. TALOS is a point absorbe...
متن کاملAccurate Modeling and Identification of Servo-Hydraulic Cylinder Systems in Multi-Axial Test Applications
Servo-hydraulic control is regarded as a key technology in most mechanical testing systems for the investigation of strength and fatigue properties of materials, mechanical components and structures. High performance but robust control strategies are necessary as part of the test control system to ensure high test quality and reproducible test results which are of special importance when consid...
متن کاملPreliminary results on multi-body dynamic simulation of a new test rig for wheel-rail contact
The ability to perform rolling contact fatigue (RCF) experiments in wheel–rail material is provided by a new small–scale test rig, manifesting the actual dynamic behaviour of the railway system. In this paper, a multi-body dynamics (MBD) model is proposed, simulating the vibration behaviour of the prescribed rig. The new testing facility is modelled using a three-dimensional model of the vehicl...
متن کاملApplication of Optimal-tuning Pid Control to Industrial Hydraulic Systems
This paper is concerned with real-time optimal-tuning PID control design for industrial hydraulic systems. Several optimal-tuning controller design techniques are used for a hydraulic position control system. After analysis on the system, a nonlinear dynamical model is derived. A nonlinear PID control scheme with inverse of dead zone is introduced to overcome the dead zone in this hydraulic sys...
متن کامل