Fragility-Rings - A Graphic Tool for PI/PID Controllers Robustness-Fragility Analysis
نویسندگان
چکیده
The aim of the paper is to present the Delta 20 Fragility-Rings plot and its use for robustness-fragility analysis of proportional integral (PI) and proportional integral derivative (PID) controllers. Using the Delta 20 Fragility Index and the Nyquist plot it shows the areas on the L(jω) plane corresponding to robustness-fragile, robustness-non-fragile and robustnessresilient controllers providing a visual aid for evaluation of the controller robustness-fragility when its parameters are perturbed.
منابع مشابه
A SENSITIVITY ANALYSIS FOR ENHANCING IDA EFFICIENCY IN FRAGILITY ANALYSIS OF 3D REINFORCED CONCRETE FRAMES
Due to several uncertainties which affect structural responses of Reinforced concrete (RC) frames, it is sensibly required to apply a vulnerability analysis tool such as fragility curve. To construct an analytical fragility curve, the incremental dynamic analysis (IDA) method has been extensively used as an applicable seismic analysis too...
متن کاملFragility Curves Derivation for a Pile-Supported Wharf
This study aims to develop seismic fragility curves for a typical pile-supported wharf. Fragility curve is one of the popular tools in seismic performance evaluation of a structure. The software FLAC2D was used to simulate the seismic performance of the wharf structure. Using eight time history records, occurred in past, as seismic loading, incremental dynamic analysis (IDA) was applied for sei...
متن کاملOptimal Robust Tuning for 1DoF PI/PID Control Unifying FOPDT/SOPDT Models
The aim of the paper is to present tuning equations for one-degree-of-freedom (1DoF) proportional integral (PI) and proportional integral derivative (PID) controllers. These are based on a performance/robustness trade-off analysis with firstand second-order plus deadtime models. On the basis of this analysis a tuning method is developed for 1DoF PI and PID controllers for servo and regulatory c...
متن کاملAnalysis and performance comparison of PID and fractional PI controllers
This paper compares the frequency domain performance criterion (Jv) of PI, fractional PI, and PID controllers when a step load disturbance is applied at the plant input. Process information is available in form of first-order plus dead-time (FOPDT) model. In addition, the controllers were compared using the H∞–norm of the sensitivity function as a measure of robustness, and some comments on ind...
متن کاملAnalysis and Design of Software-Based Optimal PID Controllers
A large process industry can have somewhere between five hundred and five thousand control loops, and PID controllers are used in 90–97% of the cases. It is well-known that only 20–30% of the controllers in the process industry are tuned satisfactorily, but with the methods available today it is considered too time-consuming to optimize each single controller. This thesis presents tools for ana...
متن کامل