Development of a Melt Pool Tracking Vision System for Laser Deposition
نویسندگان
چکیده
This paper chronicles the development of a vision system for tracking melt pool morphology in the laser metal deposition process. This development is to augment an existing temperature feedback control system. Monitoring both the temperature and shape of the melt pool is necessary because of the effects of local geometry on the cooling rate at the melt pool. Temperature feedback alone cannot accommodate this effect without complex process planning. The vision system’s hardware, software, and integration into the laser deposition system’s controller is detailed in this paper. Preliminary testing and the effects on deposition quality is also discussed.
منابع مشابه
Online Melt Pool Temperature Control for Laser Metal Deposition Processes
Melt pool temperature is of great importance to deposition quality in Laser Metal Deposition processes. To control the melt pool temperature, an empirical process model describing the relationship between the temperature and process parameters (i.e., laser power, powder flow rate, and traverse speed) is established and verified experimentally. A general tracking controller using the Internal Mo...
متن کاملEmpirical Modeling and Vision Based Control for Laser Aided Metal Deposition Process
This paper gives a brief description of the laser aided manufacturing process. Empirical models describing the process dynamics of the laser aided metal deposition process is developed based on some of the models found in the literature. These models provide the basis for process planning and real time control. An embedded vision system, a two color temperature sensor, and a laser displacement ...
متن کاملEffects of Melt Pool Variables and Process Parameters in Laser Direct Metal Deposition of Aerospace Alloys
Despite considerable advances in of laser direct metal deposition (LDMD) process optimization, there is rather limited work reported on the effects of melt pool variables on the final deposit characteristics. This article considers the effects of process parameters and melt pool characteristics on the deposition of Inconel 718 powder on a Ti-6Al-4V thin wall. A 1.5kW diode laser and LDMD system...
متن کاملModified Enthalpy Method Applied to Laser Annealing of Semi Conductor Films
The rapid melting of silicon film due to the absorption of a CW laser beam radiation is studied. The silicon film melting and recrystallization is mainly controlled by the temperature distribution in the semiconductor. The enthalpy technique for the solution of phase change problems is used in an explicit finite difference form to calculate the transient temperature distribution in the silicon ...
متن کاملInfluence of Fluid Convection on Weld Pool Formation in Laser Cladding
Laser cladding is a relatively fast and precise metal deposition process that has been widely applied to deposit coatings to protect parts from wear and/or corrosion and to rebuild worn surfaces of expensive components such as jet engine turbine blade tips. Economic development of laser cladding process applications is impeded by lack of a capability to accurately predict the results of complex...
متن کامل