Area I. Multiphase Reactors and Processes: Experimental and Modeling Bubble and Slurry Bubble Columns
ثبت نشده
چکیده
منابع مشابه
Application of New Inflection Point Method for Hydrodynamics Study in Slurry Bubble Column Reactors
Bubble column reactors are used in a wide variety of applications such as multiphase bioreactors, catalytic slurry reactors, and absorption processes. The superficial gas velocity-gas holdup relationship and transition point are two important parameters for characterizing the hydrodynamics of a bubble column reactor. In this study, systematic investigation of a nitrogen - water - glass bead...
متن کاملEulerian simulation of bubble columns reactors and effect of various parameters on the gas holdup
Gas holdup and bubble size are important parameters for simulation and designing in bubble column reactors. Because based on these parameters, the available gas-liquid interfacial area is defined for mass transfer. In this paper, the results of applying magnetic fields on the velocity field and volume fraction of gas holdup are reported. Hydrodynamics of the bubble column in the reactors is inv...
متن کاملBiodegradation Modeling of Nitrophenolic Pollutant in a Slurry Bubble Reactor
Biodegradation kinetics of 4-nitrophenol (PNP) in aqueous solution by a gram negative soil bacterium, Ralstoniaeutropha was firstly studied in a small scale batch reactor. The degradation of PNP was evaluated at initial PNP concentrations ranging from 3 mg/L to 14 mg/L. The rate of PNP consumption by the bacterium culture was modeled using Monod and Contois kinetics in batch condition. PNP degr...
متن کاملIntegration of Particle to Bubble Adhesion Model in Design and Scale-Up of Slurry Bubble Columns
In slurry bubble column reactors, catalyst particles may adhere to gas bubbles. Thus, mass transfer limited reactions can be significantly improved either by increasing G-L mass transfer coefficient kL or specific surface area a. The scope of this work is to study the influence of model parameters on coalescence and G-L mass transfer, in order to develop new rules for design and scale-up of slu...
متن کاملNew Approaches for Theoretical Estimation of Mass Transfer Parameters in Both Gas-Liquid and Slurry Bubble Columns
Bubble columns (with and without suspended solids) have been used widely as chemical reactors, bioreactors and equipment for waste water treatment. The key design parameters in bubble columns are: • gas holdup; • gas-liquid interfacial area; • volumetric liquid-phase mass transfer coefficient; • gas and liquid axial dispersion coefficients; Despite the large amount of studies devoted to hydrody...
متن کامل