Analysis of Near - Surface Oceanic Measurements Obtained During
نویسندگان
چکیده
Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 222024302 Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 9/2/2009 2. REPORT TYPE FINAL 3. DATES COVERED (From To) 10-NOV-2005 through 31-MAR-2009
منابع مشابه
Instantaneous 3D Continental-Shelf Scale Imaging of Oceanic Fish by Multi-Spectral Resonance Sensing Reveals Group Behavior during Spawning Migration
The migration of extensive social groups towards specific spawning grounds in vast and diverse ocean environments is an integral part of the regular spawning process of many oceanic fish species. Oceanic fish in such migrations typically seek locations with environmental parameters that maximize the probability of successful spawning and egg/larval survival. The 3D spatio-temporal dynamics of t...
متن کاملResidual Stresses Measurement in Hollow Samples Using Contour Method
Residual stresses are created usually undesirably during manufacturing processes, including casting, welding, metal forming, etc. Residual stresses alone or in combination with other factors can cause the destruction and fracture of components or significant decline in their service life. Therefore, it is crucial to measure the residual stresses. Contour method is a destructive testing method c...
متن کاملA Study to determine the accuracy of satellite measurements for the salinity pattern and surface temperature of Persian Gulf using statistical method
The aim of this paper is to determine the sea surface salinity (SSS) and temperature (SST) of Persian Gulf by using the AMSU-B sensor data of NOAA-16 satellite. A multiple linear regression method was used by statistical computing software R on AMSU-B data and in-situ data. Based on the results, the correlation coefficient (R2) for salinity and temperature was 0.85 and 0.94, respectively. Also,...
متن کاملA simple form of MT impedance tensor analysis to simplify its decomposition to remove the effects of near surface small-scale 3-D conductivity structures
Magnetotelluric (MT) is a natural electromagnetic (EM) technique which is used for geothermal, petroleum, geotechnical, groundwater and mineral exploration. MT is also routinely used for mapping of deep subsurface structures. In this method, the measured regional complex impedance tensor (Z) is substantially distorted by any topographical feature or small-scale near-surface, three-dimensional (...
متن کاملAnalysis of Flow of Nanofluid through a Porous Channel with Expanding or Contracting Walls using Chebychev Spectral Collocation Method
In this work, we applied Chebychev spectral collocation method to analyze the unsteady two-dimensional flow of nanofluid in a porous channel through expanding or contracting walls with large injection or suction. The solutions are used to study the effects of various parameters on the flow of the nanofluid in the porous channel. From the analysis, It was established that increase in expansion r...
متن کاملTemperature, Salinity and Density Measurements in the Coastal Waters of the Rudsar, South Caspian Sea
CTD (conductivity, temperature and depth) data collected in the coastal waters of Rudsar in summer 2008 were analyzed to identify the isothermal layers, thermocline depth and vertical structure of seawater properties. During the survey, probe was released into the seawater column down to 117 m depth. Results showed a vertical variation of temperature between 29°C at the sea surface and less tha...
متن کامل