An Investigation of new combination of PIN diode for RF/Microwave Switch
نویسنده
چکیده
This paper presents a new combination of PIN diode switch for low insertion loss and high isolation. The combination is designed for frequency 0.1 to 10 GHz. In new combination we connect the two series-shunt combination one is across the input port and the other one is across the output port with one shunt diode connect between two λ/4 micro strip line. It has been concluded that in new combination the isolation increase and insertion loss decrease as compare to the previous combinations designed. In previous combinations we get ≈25db isolation, but the new combination give the isolation ≈ 76db which is much better compare to previous isolation.
منابع مشابه
Low Loss mm-Wave Monolithic SP4Ts
Many of the emerging broadband wireless access systems operate at mm-wave frequencies where large allocations of spectrum are available. GaAs Monolithic Microwave Integrated Circuits (MMICs) offer a means of realising low cost, high performance, high volume, reproducible mm-wave components. This paper details two Single Pole 4 Throw (SP4T) switch MMICs covering 24 to 34GHz and 34 to 45GHz. The ...
متن کاملMMICs for Broadband Receiver Applications
This paper details the design, realisation and measured performance of a set of MMICs for broadband receiver applications. Five different MMICs are described: A 0.5 to 20GHz dual channel limiter, a 2 to 18GHz dual channel Low Noise Amplifier (LNA), a DC to 20GHz dual channel Single Pole Double Throw (SPDT) switch, a 2 to 18GHz upconverter and a companion downconverter. The MMICs can be used to ...
متن کاملRF model of flexible microwave single-crystalline silicon nanomembrane PIN diodes on plastic substrate
This paper reports the realization and RF modeling of flexible microwave P-type-Intrinsic-N-type (PIN) diodes using transferrable single-crystalline Si nanomembranes (SiNMs) that are monolithically integrated on low-cost, flexible plastic substrates. With high-energy, high-dose ion implantation and high-temperature annealing before nanomembrane release and transfer process, the parasitic parame...
متن کاملCITY UNIVERSITY OF HONG KONG 香港城市大學 Study on Innovative Integrated Power Amplifier/Low Noise Amplifier/Switch for Wireless Application
The front-end transmit/receive switch circuit is one of the essential elements in modern wireless handsets. The main function of the transmit/receive switch is switch the antenna either to the transmitter or the receiver. It must have high isolation in order to avoid the RF-power of the transmitter (PA) turning on the receiver (LNA), resulting in high loss or in the worst case damage. Low inser...
متن کاملSolid State PIN Control Products
PIN diodes are fundamentally similar to standard diodes, but have an RF impedance that is determined by an externally supplied bias current. Their versatility makes them excellent building blocks in a wide variety of configurations within each product category, which allows diverse system requirements to be served. In short, the PIN diode enables all systems – from the least complex to the most...
متن کامل