Use of Ultrasonic Signal Coding and Pir Sensors to Enhance the Sensing Reliability of an Embedded Surveillance System
نویسندگان
چکیده
In this paper we design and implement an embedded surveillance system by use of ultrasonic signal coding of ultrasonic sensors with multiple pyroelectric infrared sensors (PIR) to detect an intruder in a home or a storehouse. The PIR sensors are placed on the ceiling, and the ultrasonic sensor module consists of a transmitter and a receiver which are placed in a line direction; however, ultrasonic sensors with the same frequency are subject to interference by crosstalk with each other and have a high miss rate. To overcome these disadvantages of the ultrasonic sensor, our design reduces the miss rate from the environmental interference by using an ultrasonic coding signal. Both ultrasonic sensors and PIR sensors are managed by the majority voting mechanism (MVM).
منابع مشابه
overview of ways to enhance the security of video surveillance networks using blockchain
In recent decades, video surveillance systems have an increasing development that are used to prevent crime and manage facilities with rapid diffusion of (CCTV)cameras to prevent crime and manage facilities. The video stored in the video surveillance system should be managed comfortably, but sometimes the movies are leaking out to unauthorized people or by unauthorized people, thus violating i...
متن کاملDMMP Sensing Performance of Undoped and Al Doped Nanocrystalline ZnO Thin Films Prepared by Ultrasonic Atomization and Pyrolysis Method
Highly textured undoped (pure) and Al doped ZnO nanocrystalline thin films prepared by ultrasonic atomization and pyrolysis method are reported in this paper. ZnCl2 water solution was converted into fine mist by ultrasonic atomizer (Gapusol 9001 RBI Meylan, France). The mist was pyrolyzed on the glass substrates in horizontal quartz reactor placed in furnace. The Structural and microstructural ...
متن کاملطراحی و ساخت روبشگر فراصوتی جهت تهیه تصاویر روبش B (B-Scan) از قطعات صنعتی
The results of ultrasonic tests are usually displayed as A-scan signals. In an A-scan signal, reflections of ultrasonic wave form different reflectors are shown as sharp echoes on a time by amplitude display. Interpretation of these echoes can sometimes be quite difficult and usually requires knowledgeable and experienced specialists. There exist other methods of displaying the ultrasonic test...
متن کاملInvestigation of Always Present and Spectrum Sensing based Incumbent Emulators
Cognitive radio (CR) technology has been suggested for effective use of spectral resources. Spectrum sensing is one of the main operations of CR users to identify the vacant frequency bands. Cooperative spectrum sensing (CSS) is used to increase the performance of CR networks by providing spatial diversity. The accuracy of spectrum sensing is the most important challenge in the CSS process sinc...
متن کاملTransverse Sensing of Simply Supported Truncated Conical Shells
Modal signals of transverse sensing of truncated conical shells with simply supported boundary condition at both ends are investigated. The embedded piezoelectric layer on the surface of conical shell is used as sensors and output voltages of them in considered modes are calculated. The Governing sensing signal displacement equations are derived based on the Kirchhoff theory, thin-shell assumpt...
متن کامل