Analysis of Gyroscopic Effects in Rotor-disc Systems
نویسنده
چکیده
i
منابع مشابه
Application of Augmented Observer for Fault Diagnosis in Rotor Systems
Observers are widely used to generate residuals for fault diagnosis processes. However the generated residuals are not only influenced by faults but also by disturbances and model uncertainties. In order to avoid false alarm and achieve a high fault detection rate disturbances and model uncertainties have to be considered in the fault detection and isolation (FDI) processes. In rotor systems th...
متن کاملVibration Analysis of Rotating Shaft with Loose Disk
In this paper energy method is used to calculate rotor response with loose rotating disk on it. System equation of motion is obtained based on energy method and Lagrange equation. Mathematical modeling of loose disk in a rotor bearing system has resulted in terms similar to unbalance and gyroscopic effect in the system equation of motion. The effect of loose disk axial position and orthotropic ...
متن کاملAnalysis on Response of Magnetic Bearing System to External Forces Comparison between Optimal Regulator System and Independently Controlled System
Analysis on Response of Magnetic Bearing System to External Forces Comparison between Optimal Regulator System and Independently Controlled System Takeshi MIZUNO, Toshiro HIGUCHI and Noboru AIKAWA One of the significant problems in designing a magnetic bearing control system is that there are gyroscopic couplings between two rotational motions of the suspended rotor. Because of these couplings ...
متن کاملLongitudinal-Torsional and Two Plane Transverse Vibrations of a Composite Timoshenko Rotor
In this paper, two kinds of vibrations are considered for a composite Timoshenko rotor: longitudinal-torsional vibration and two plane transverse one. The kinetic and potential energies and virtual work due to the gyroscopic effects are calculated and the set of six governing equations and boundary conditions are derived using Hamilton principle. Differential quadrature method (DQM) is used as ...
متن کاملMicrosoft Word - WCECS2012_Augmented_Observer
Disturbances and model uncertainties often have large impact on model based fault detection and isolation (FDI) processes and result in false alarm or reduced fault detection rate. In rotor systems exited by unbalances, the predominant disturbances (e.g. unbalance forces) and model uncertainties caused by gyroscopic effect appear in a sinusoidal form with rotor rotary frequency. If the influenc...
متن کامل