Constitutive equations for an elastic material with anisotropic rigid particles.
نویسندگان
چکیده
In this paper we have derived constitutive equations for an elastic material with anisotropic rigid particles. We have included a dependence on the Finger tensor B and the orientation tensor Q in the expression for the free energy of the system. With this expression for the free energy we have derived an expression for the stress tensor up to second order in both these variables. We have shown that the elastic modulus in this expression depends on Q, and this dependence leads to an effective elastic modulus that depends on the strain. We have calculated the explicit form of the equation for the stress tensor for a deformation in the xy plane with a strain equal to -gamma. For fully isotropic materials with Q=0 this expression reduces to an equation containing only odd powers of gamma. The inclusion of a non-zero value for the orientation tensor leads to an additional set of terms in the equation, all proportional to Qxy (the xy component of the tensor Q), and all proportional to even powers of gamma. We have qualitatively compared these expressions with Fourier transform (FT) rheological measurements of xanthan gels, at concentrations above and below the order-disorder transition. In FT rheometry an oscillatory deformation is applied in the nonlinear regime, and the resulting stress response is analyzed in Fourier space. In the 2% (w/w) xanthan system (disordered state) only odd harmonics were found in the stress response, whereas in the 4% (w/w) xanthan gel (ordered state) even harmonics could be detected. As predicted by our theory, the intensity of these even harmonics first increased with increasing gamma, until a maximum value was reached. Beyond this maximum the intensity decreased continuously with increasing gamma.
منابع مشابه
Constitutive Model for Multi-laminate Induced Anisotropic Double Hardening Elastic-plasticity of Sand
A constitutive multi-laminate based elastic-plastic model developed to be capable of accounting induced anisotropic behavior of granular material such as sand. The fabric feature or grain orientation characteristic effects through medium are considered in a rational way under any complex stress path, including cyclic loading. The salient feature of the developed model is a non-associative on pl...
متن کاملExtraction of Nonlinear Thermo-Electroelastic Equations for High Frequency Vibrations of Piezoelectric Resonators with Initial Static Biases
In this paper, the general case of an anisotropic thermo-electro elastic body subjected to static biasing fields is considered. The biasing fields may be introduced by heat flux, body forces, external surface tractions, and electric fields. By introducing proper thermodynamic functions and employing variational principle for a thermo-electro elastic body, the nonlinear constitutive relations an...
متن کاملBuckling Analysis of Orthotropic and Anisotropic Rectangular Plates by GDQ Method
In this paper, buckling of orthotropic rectangular plates under different loadings was investigated. For this reason, governing buckling equations for an isotropic plate were modified by applying constitutive equations of orthotropic materials. After obtaining the equations of orthotropic plates, Generalized Differential Quadrature method (GDQM) was applied on buckling equations and thus a set ...
متن کاملBuckling Analysis of Orthotropic and Anisotropic Rectangular Plates by GDQ Method
In this paper, buckling of orthotropic rectangular plates under different loadings was investigated. For this reason, governing buckling equations for an isotropic plate were modified by applying constitutive equations of orthotropic materials. After obtaining the equations of orthotropic plates, Generalized Differential Quadrature method (GDQM) was applied on buckling equations and thus a set ...
متن کاملAn Axisymmetric Torsion Problem of an Elastic Layer on a Rigid Circular Base
A solution is presented to a doubly mixed boundary value problem of the torsion of an elastic layer, partially resting on a rigid circular base by a circular rigid punch attached to its surface. This problem is reduced to a system of dual integral equations using the Boussinesq stress functions and the Hankel integral transforms. With the help of the Gegenbauer expansion formula of the Bessel f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review. E, Statistical, nonlinear, and soft matter physics
دوره 63 5 Pt 1 شماره
صفحات -
تاریخ انتشار 2001