An approach to the utilisation of CO2 as impregnating agent in steam pretreatment of sugar cane bagasse and leaves for ethanol production

BACKGROUND The conditions for steam pretreatment of sugar cane bagasse and leaves were studied using CO2 as an impregnating agent. The following conditions were investigated: time (5 to 15 min) and temperature (190 to 220 degrees C). The pretreatment was assessed in terms of glucose and xylose yields after enzymatic hydrolysis and inhibitor formation (furfural and hydroxymethylfurfural) in the pretreatment. Results from pretreatment using SO2 as impregnating agent was used as reference. RESULTS For sugar cane bagasse, the highest glucose yield (86.6% of theoretical) was obtained after pretreatment at 205 degrees C for 15 min. For sugar cane leaves the highest glucose yield (97.2% of theoretical) was obtained after pretreatment at 220 degrees C for 5 min. The reference pretreatment, using impregnation with SO2 and performed at 190 degrees C for 5 min, resulted in an overall glucose yield of 79.7% and 91.9% for bagasse and leaves, respectively. CONCLUSIONS Comparable pretreatment performance was obtained with CO2 as compared to when SO2 is used, although higher temperature and pressure were needed. The results are encouraging as some characteristics of CO2 are very attractive, such as high availability, low cost, low toxicity, low corrosivity and low occupational risk.