Frequency-tuning for control of parametrically resonant mass sensors
نویسندگان
چکیده
Parametric resonance based mass sensing leads to increased sensitivity over other resonant methods. In this work, we present a frequency-tuning approach to measure mass change in an ultra-sensitive mass sensor. This scheme drives the oscillator using an electrical signal with fixed frequency and tunes the parametric resonance frequency to match the driving frequency by feeding back a dc offset to the sensor. Instead of monitoring frequency shift of the oscillation in a micro-oscillator, mass change in the sensor can be detected by measuring the shift in dc offset, making the sensor amenable to closed-loop control. This scheme and the prototype mass sensor with a mass of 30 ng and a first mode harmonic resonance frequency of 83 kHz has been built and experimentally characterized. Good correlation between parametric resonance frequency and dc offset has been shown and the noise floor is less than 1 pg. The sensor is used to track water content variation in a humidity-testing chamber and shows increased efficiency over open loop operation. © 2005 American Vacuum Society. DOI: 10.1116/1.1924717
منابع مشابه
Large Amplitude Vibration Analysis of Graphene Sheets as Resonant Mass Sensors Using Mixed Pseudo-Spectral and Integral Quadrature Methods
The present paper investigates the potential application of graphene sheets with attached nanoparticles as resonant sensors by introducing a nonlocal shear deformation plate model. To take into account an elastic connection between the nanoplate and the attached nanoparticle, the nanoparticle is considered as a mass-spring system. Then, a combination of pseudo-spectral and integral quadrature m...
متن کاملAn Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester
Power supply is a bottle-neck problem of wireless micro-sensors, especially where the replacement of batteries is impossible or inconvenient. Now piezoelectric material is being used to harvest vibration energy for self-powered sensors. However, the geometry of a piezoelectric cantilever beam will greatly affect its vibration energy harvesting ability. This paper deduces a remarkably precise an...
متن کاملEffect of the Interparticle Interactions on Adsorption-Induced Frequency Shift of Nano-beam-Based Nanoscale Mass-Sensors: A Theoretical Study
It is well-known that the Interparticle interactions between adsorbates and surface of an adsorbent can affect the surface morphology. One of the consequences of this issue is that the resonant frequency of a nanoscale resonator can be changed due to adsorption. In this study we have chosen a cantilever-based nanoscale mass-sensor with a single nanoparticle at its tip. Using the classical...
متن کاملResonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester
The concept of “energy harvesting” is to design smart systems to capture the ambient energy and to convert it to usable electrical power for supplying small electronics devices and sensors. The goal is to develop autonomous and self-powered devices that do not need any replacement of traditional electrochemical batteries. Now piezoelectric cantilever structures are being used to harvest vibrati...
متن کاملNanocantilevers with Adjustable Static Deflection and Significantly Tunable Spectrum Resonant Frequencies for Applications in Nanomechanical Mass Sensors
Nanocantilevers have become key components of nanomechanical sensors that exploit changes in their resonant frequencies or static deflection in response to the environment. It is necessary that they can operate at a given, but adjustable, resonant frequency and/or static deflection ranges. Here we propose a new class of nanocantilevers with a significantly tunable spectrum of the resonant frequ...
متن کامل