Evaluation of Stiffness Changes in a High-Rise Building by Measurements of Lateral Displacements Using GPS Technology
نویسندگان
چکیده
The outrigger truss system is one of the most frequently used lateral load resisting structural systems. However, little research has been reported on the effect of installation of outrigger trusses on improvement of lateral stiffness of a high-rise building through full-scale measurements. In this paper, stiffness changes of a high-rise building due to installation of outrigger trusses have been evaluated by measuring lateral displacements using a global positioning system (GPS). To confirm the error range of the GPS measurement system used in the full-scale measurement tests, the GPS displacement monitoring system is investigated through a free vibration test of the experimental model. Then, for the evaluation of lateral stiffness of a high-rise building under construction, the GPS displacement monitoring system is applied to measurements of lateral displacements of a 66-story high-rise building before and after installation of outrigger truss. The stiffness improvement of the building before and after the installation is confirmed through the changes of the natural frequencies and the ratios of the base shear forces to the roof displacements.
منابع مشابه
Evaluating the Performance of the Buckling Restrained Braces in Tall Buildings with peripherally braced frames
In recent years, seismic design of structures has been undergoing significant changes due to increasing demand for optimization and minimizing the level of damage and reducing the cost of structural repairs. Development of analytical methods and remarkable improvements of computer performance have been among the factors which influenced the design of structures. A lot of research has been condu...
متن کاملSeismic Retrofit of a Historical Building in Tehran University Museum Using FRP Technology and Steel Jacketing
In this paper evaluation of seismic capacity of a historical building is carried out. It had been used as a national library about 40 years ago. Also, before that, it had been constructed as a part of a Royal complex. This building has been constructed by traditional methods using bricks and mortars. The ceilings system of the structure consists of jack arches. Also, the roof of the building ha...
متن کاملLeast Squares Techniques for GPS Receivers Positioning Filter using Pseudo-range and Carrier Phase Measurements
In present study, using Least Squares (LS) method, we determine the position smoothing in GPS single-frequency receiver by means of pseudo-range and carrier phase measurements. The application of pseudo-range or carrier phase measurements in GPS receiver positioning separately can lead to defects. By means of pseudo-range data, we have position with less precision and more distortion. By use of...
متن کاملStudy on different solutions to reduce the dynamic impacts in transition zones for high-speed rail
One of the most important factors influencing the track maintenance is the transitions between parts of the track with different vertical stiffness. The dynamic...
متن کاملSimulation of Smoke Emission from Fires in High-Rise Buildings Using the 3D Model Generated from 2-Dimensional Cadastral Data
Having a 3-Dimensional model of high-rise buildings can be used in disaster management such as fire cases to reduce casualties. The fundamental dilemma in 3D building modeling is the unavailability of suitable data sources. However, available cadastral 2D maps could be used as low-cost and attainable resources for 3D building modeling. Smoke will be a great threat to people's health during a f...
متن کامل