Regeneration of Spent Catalysts with Ozone
نویسنده
چکیده
This study investigates the in-situ regeneration of deactivated Pt-Pd catalyst in a laboratory-scale catalysis reactor. Different regeneration conditions are tested and the activity and characteristics of regenerated catalysts are analyzed. Experimental results show that the conversion efficiencies of C3H6 by different regenerated Pt-Pd catalysts were significantly improved from 77%, 55% and 41% to 86%, 98% and 99%, respectively. The best regeneration conditions was 52ppm ozone, 500C, and 10min. Regeneration temperature has more influences than ozone concentration and regeneration time. With the comparisons of characteristics of deactivated catalyst and regenerated catalyst, the major poison species (carbon, metals, chloride, and sulfate) on the spent catalysts can be effectively removed by ozone regeneration. Keywords—Catalyst, deactivated, ozone, regeneration.
منابع مشابه
Thermal regeneration and decoking optimization of chlorinated platinum/alumina catalysts for the isomerization process
The samples of spent chlorinated Pt/Al2O3 catalysts that were used in the isomerization process were decoked at elevated temperatures under airflow and different oxygen concentrations. The surface of the catalyst was characterized by thermal gravimetric analysis, differential scanning calorimetry, Brunauer-Emmett-Teller analysis, attenuated total reflection fast Fourier in...
متن کاملSeparation and Recovery of Platinum and Palladium from Spent Petrochemical Catalysts Using Activated Carbon, Analysis of Two Kind of Most Used Catalysts in Petro Chemistry
The goal of this work is the separation and recovery of platinum and palladium from spent catalyst. The recovery consisted of separating the maximum amount of platinum and palladium from catalysts and changing them into usable forms. The petroleum and petrochemical units use Pt and Pd catalyst for reactions such as reforming and hydrogenation. Because these materials contain valuable metals...
متن کاملEvaluation of Spent Catalyst Structure Changes during Ethylbenzene Dehydrogenation in Different Technologies
Ethylbenzene (EB) dehydrogenation to styrene (SM) on an industrial scale is generally performed using classic and SMART (Styrene Monomer Advanced Reheat Technology) technologies. In the current study, spent catalysts structural changes through classic and SMART technologies were investigated and compared with the fresh catalyst. For this purpose, XRF, XRD, SEM-EDX, FT-IR, BET and crushing s...
متن کاملOptimization of chemical regeneration procedures of spent activated carbon
The chemical regeneration of granular activated carbon exhausted in a petrochemical wastewater unit was investigated. Gas chromatography and energy-dispersive X-ray spectroscopy demonstrated that spent activated carbon carries large types of organic and inorganic materials. Diverse chemical solvents were adopted in comparison with traditional chemical solvents and regeneration efficiency was in...
متن کاملThe Concept about the Regeneration of Spent Borohydrides and Used Catalysts from Green Electricity
Currently, the Brown-Schlesinger process is still regarded as the most common and mature method for the commercial production of sodium borohydride (NaBH4). However, the metallic sodium, currently produced from the electrolysis of molten NaCl that is mass-produced by evaporation of seawater or brine, is probably the most costly raw material. Recently, several reports have demonstrated the feasi...
متن کامل