Adapting the mode profile of planar waveguides to single-mode fibers: a novel method.
نویسندگان
چکیده
A novel method for coupling single-mode fibers to planar optical circuits with small waveguide dimensions is proposed. The method eliminates the need to apply microoptics or to adapt the waveguide dimensions within the planar circuit to the fiber dimensions. Alignment tolerances are comparable to those of fiber- fiber coupling. The low loss potential of the method is experimentally demonstrated for A1(2) O(3) waveguides on silicon substrates.
منابع مشابه
Design of Endlessly Single Mode Photonic Crystal Fibers with Desirable Properties using HC-EDA Algorithm
In this article, Hill Climbing (HC) and Estimation of Distribution Algorithm (EDA) are integrated to produce a hybrid intelligent algorithm for design of endlessly Single Mode Photonic Crystal Fibers (SMPCFs) structure with desired properties over the C communication band. In order to analyzing the fiber components, Finite Difference Frequency Domain (FDFD) solver is applied. In addition, a spe...
متن کاملساختار مد طولی برای تشدیدگر حلقوی ناهم سطح
The structure of longitudinal modes of a passively Q-switched, non-planar unidirectional ring-resonator,with Nd:YAG active medium is described in this article. Two different techniques are used to study the longitudinal mode structure of the laser resonator. At first, the fast-fourier transform technique is applied for analyzing the mode beating of the optical fields by intensity frequency str...
متن کاملComprehensive Theoretical Study on Threshold Power of Stimulated Brillouin Scattering in Single-Mode Fibers
We have investigated and developed a theoretical approach to explore stimulated Brillouin scattering (SBS) phenomena in single mode fiber. SBS happening threshold power condition has been studied in terms of fiber parameters and input pump power. To assess threshold power precisely, the pump depletion effect and fiber loss has been included by employing 1% criterion. The threshold exponential g...
متن کاملSensorless Indirect Field Oriented Control of Single-sided Linear Induction Motor With a Novel Sliding Mode MRAS Speed Estimator
This paper proposes a new sliding mode control (SMC) based model reference adaptive system (MRAS) for sensorless indirect field oriented control (IFOC) of a single-sided linear induction motor (SLIM). The operation of MRAS speed estimators dramatically depends on adaptation mechanism. Fixed-gain PI controller is conventionally used for this purpose which may fail to estimate the speed correctl...
متن کاملTaper control of radially-symmetric gradient-index waveguides in photopolymer
Optical waveguide adiabatic tapers enable low-loss connections between devices with dissimilar mode profiles. Common examples are semiconductor lasers, single-mode optical fibers and planar waveguides. Planar lithographic processes can easily create tapers in the plane but out-of-plane, symmetric tapers are difficult. Three-dimensional direct-write lithography into photopolymer naturally create...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 30 21 شماره
صفحات -
تاریخ انتشار 1991