Design of Low Noise Amplifier for Uwb Radio Receiver
نویسنده
چکیده
An Ultra Wide Band CMOS Low Noise Amplifier (LNA) design is presented in this paper. Due to low power consumption and extremely high data rates the UWB system is bound to be popular in the end user market. The LNA is the first stage after antenna in an UWB transceiver. The LNA is accountable for providing enough gain to the signal with the bare minimum distortion. In this work we have designed and evaluated the performance of a complementary metal oxide semiconductor (CMOS) low noise amplifier (LNA) for 3.1-10.6 GHZ frequency band. Agilent's ADS tool has been used to simulate the designed LNA and is proved to have better noise figure as well as input matching. The designed LNA provides the low S11, S22, and noise figure. The gain achieved is 6 dB and the response over the band of interest is almost flat.
منابع مشابه
A 0.18um CMOS Current Reused Low-Noise Amplifier with Gain Compensated for Ultra-Wideband Wireless Receiver
A current reused low-noise amplifier (LNA) with gain compensated to extend the bandwidth and is designed for ultra-wideband (UWB) wireless receiver. The design consists of two cascode common-source amplifier and an output buffer which is implemented in 0.18um RF CMOS process. The LNA gives 13.1dB gain; 9.1GHz 3dB bandwidth (3.1-12.2GHz) while consuming 13.9mW through a 1.8V supply. Over the 3.1...
متن کاملA Modified Noise Analysis of a Common Source ̶ Common Gate Low Noise Transconductance Amplifier for Sub-micron Technologies
This paper is based on analysis of a common source - common gate low noise transconductance amplifier (CS-CG LNTA). Conventional noise analyses equations are modified by considering to the low output impedance of the sub-micron transistors and also, parasitic gate-source capacitance. The calculated equations are more accurate than calculated equations in other works. Also, analyses show that th...
متن کاملA Broadband Low Power CMOS LNA for 3.1–10.6 GHz UWB Receivers
A new approach for designing an ultra wideband (UWB) CMOS low noise amplifier (LNA) is presented. The aim of this design is to achieve a low noise figure, reasonable power gain and low power consumption in 3.1-10.6 GHz. Also, the figure of merit (FOM) is significantly improved at 180nm technology compared to the other state-of-the-art designs. Improved π-network and T-network are used to obt...
متن کاملDesign of Low Noise Amplifier at 3-10GHz for Ultra Wideband Receiver
This paper presents a Low Noise Amplifier for UWB Radio Receiver at 8.72GHz using 0.18μm UMC Technology where 0.18μm technology is for lower power consumption. UWB Radio Receiver which made up in between the frequency range of 3.1GHz to 10.6GHz.The basic architecture of LNA comprises a RF amplifier in the middle of input matching network and the output matching network. We have designed a low n...
متن کاملAnalysis of Various Techniques in Low Noise Amplifier Design
1,2 Anna University Abstract—Low noise amplifier is a crucial and essential component in RF receiver design. It amplifies the received weak RF signal with minimum noise contribution. Designing Low noise amplifier with CMOS technology is one of the important topics in research fields due to its advantages of low power, low cost and higher integration. Applications of LNA include WLAN, WSN and UW...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011