Comparative 3d Fem Analysis of Three Different Dental Implant Shapes

نویسندگان

  • Stanisław KUT
  • S. Kut
چکیده

This paper presents the results of numerical modeling using the finite element method of three implants. Geometric models of individual parts of the analyzed system (implant, abutment and screw) and the standard models of the bone and the crown were built in the Ideas NX environment. On the basis of real geometric models the fully three-dimensional numerical models were built. The calculations for different implant systems were carried out using MARC/Mentat commercial software. The numerical models of each system consist of five deformable bodies being connected to each others. Modeling was carried out in two stages. The first stage includes the modeling of the stresses in the bone-implant-abutment-screw assembly. The preload of models was set so that the axial stress in the screw core is equal to 75% of yield stress of material from which the screw was made. In the second stage the model with assembly stresses was being loaded with oblique force on the crown with values in the range from 0 to 250 N. An analysis and comparison of stress distributions and values of stresses in analysed implant systems were carried out. This investigation shows the meaningful influence of the shape of implant of an abutment on distribution and values of stress, load capacity of individual implant systems, and furthermore, stress in osseous tissue.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

مقایسه بیومکانیکی ایمپلنت دندانی تیتانیوم خالص با زیرکونیوم -5/2% نایوبیوم پس از کاشت به روش اجزای محدود

Background and Aims: Improving dental implantation conditions in order to reduce the failure is always desirable for researchers. The aim of this study was to compare two different materials of dental implants from the viewpoint of biomechanical effect after placement and loading in the mandible. Materials and Methods: A 3D model of mandible was designed in the MIMICS 10.01 software. Then,...

متن کامل

FEM and BEM Stress Analysis of Mandibular Bone Surrounding a Dental Implant

In the present work the structural behaviour of a mandible with a dental implant, considering a unilateral occlusion, is numerically analysed by means of the Finite Element Method (FEM) and the Boundary Element Method (BEM). The mandible, whose CAD model was obtained by computer tomography scans, is considered as completely edentulous and only modelled in the zone surrounding the implant. The m...

متن کامل

Design and Analysis of a New Dental Implant using Finite Element Method

An overall treatment with dental implant consist of several essential parts, including a superstructure containing fixture (part of the implant embedding in the bone), abutment (a machined tapered prepared superstructure attached to the fixture), a retainer (which hold the aesthetic portion of the restoration) and the crown (aesthetic part of the restoration). In this common kind of restoration...

متن کامل

Effect of Abutment Angulation and Material on Stress and Strain Distributions in Premaxillary Bone: A Three-Dimensional Finite Element Analysis

Background and Aim: Dental implants with angled abutments are often inserted in the anterior maxillary region due to the status of the residual ridge and aesthetic considerations. The purpose of this study was to assess stress and strain distributions in the premaxillary bone around dental implants by means of finite element analysis (FEA). Materials and Methods: Four three-dimensional (3D) fi...

متن کامل

3D finite element non linear analysis on the stress state at bone-implant interface in dental osteointegrated implants.

PURPOSES The aim of the study was to assess by means a 3D finite element linear and non-linear analysis mechanical interaction between an implant-supported crown and surrounding tissues. MATERIALS AND METHODS A three-dimensional FEM model was developed. Four different material combinations for the abutment and the core were evaluated: Y-TZP - Y-TZP, Y-TZP - microhybrid composite, T - microhyb...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014