Compromising Radiated Emission from a Power Line Communication Cable
نویسندگان
چکیده
This contribution presents a preliminary investigation on the possibility of eavesdropping, i.e., of extracting information by exploiting the electromagnetic field radiated in the vicinity of a power line communication (PLC) network. This kind of problem is usually known in the electromagnetic compatibility area under the codename TEMPEST. Electromagnetic field measurements were carried out in a laboratory environment, both inside and outside a building, and the main statistical characteristics of the compromising channel are presented. A software tool simulating a PLC communication has been developed and used to draw a preliminary conclusion on whether the radiated emissions can be exploited or not.
منابع مشابه
Modelling cumulative high frequency radiated interference from power line communication systems
The protection of existing radio users is an important consideration in the design and deployment of high frequency (HF) powerline communication systems. Applicable radiated emission standards are now under development, most notably NB30, which is now in force within Germany. There remains, however, an ongoing debate as to the effectiveness of the currently specified field strength limits in pr...
متن کاملCorrelation Between Measured and Simulated Parameters of a Proposed Transfer Standard - Tyco Electronics
Total radiated power of a device can be measured using a mode stirred chamber (MSC). The technique is briefly outlined with emphasis on the peak and average error associated with this technique. A transfer standard, advocated by the IEEE EMCS P482 Working Group, is used as a noise source for a cable radiation study which measured and simulated the total radiated power from a cable-like noise so...
متن کاملPulse Shaping vs. OFDM Transmission Techniques for InHome Power Line Communications
The nature of the transmission medium (the electrical cable) and possible power/interference constraints coming from coexistence issues, forces Power Line Communication (PLC) signals to respect some emission limits [1, Chap.5]. Within this framework, pulse shaping may offer effective solutions to maximize Signal-to-Interference-Noise Ratio (SINR), while abiding by spectral constraints. The mode...
متن کاملCable and Phase Identification based on Power Line Communication
Phase and cable identification is a challenging issue. Power-line communication technology is applied to identify cable and phase of power distribution systems. Power cable circuits have only a limited ability to carry higher frequencies. Typically transformers prevent propagating the higher frequency carrier signal. The proposed method uses the limited propagation ability to identify the cable...
متن کاملDetermination of RF Energy Threshold Level for Ignition of Electro Explosive Devices
Electric Detonators with its two terminal paired cable may act as an efficient receiving antenna. Radiated field from other sources may optimum level of current in the cable and in turn accidental detonation may occur. Present work is focused on estimation of hazardous field strength level. Keywords-Electric detonator,effecive radiated power,mining enviroment.
متن کامل