Secondary Hardening in High Speed Steels
نویسندگان
چکیده
منابع مشابه
Erratum to: Description of full-range strain hardening behavior of steels
Mathematical expression describing plastic behavior of steels allows the execution of parametric studies for many purposes. Various formulas have been developed to characterize stress strain curves of steels. However, most of those formulas failed to describe accurately the strain hardening behavior of steels in the full range which shows various distinct stages. For this purpose, a new formula...
متن کاملDuplex Hardening of Steels for Aeroengine Bearings
Duplex hardening is a process in which conventional heat-treatments such as secondary or case hardening are followed up by surface nitriding to achieve exceptional properties, particularly in the context of aeroengine bearings. Hardness values in excess of 1 000 HV can in principle be achieved, and although the hardness decreases as a function of depth below the surface, some level of enhanceme...
متن کاملNiobium Alloyed High Strength Steels for Automotive Applications
Modern vehicle bodies make intensive use of high strength steel grades to meet the contradicting demand of lighter weight and simultaneously better mechanical performance. For many steel grades microalloying by niobium is the key to achieve their characteristic property profile. In HSLA steels niobium enhances the strength primarily by grain refinement. In interstitial free high strength steels...
متن کاملEFFECT OF SILICON CONTENT ON THE STRAIN HARDENING OF DUAL-PHASE STEELS
Abstract: In the current work, the strain hardening behavior of dual-phase steels with different silicon content (0.34- 2.26 Wt. %) was examined using the modified Crussard-Jaoul analysis. It was shown that these dual-phase steels deform in two stages over a uniform strain range. Each stage exhibited a different strain hardening exponent varying with silicon content. At the first stage, work...
متن کاملAn Analytical Electron Microscopy Study of Paraequilibrium Cementite Precipitation in Ultra-High-Strength Steel
To support quantitative design of ultra-high-strength (UHS) secondary-hardening steels, the precipitation of cementite prior to the precipitation of the M2C phase is investigated using a model alloy. The microstructure of cementite is investigated by transmission electron microscopy (TEM) techniques. Consistent with earlier studies on tempering of Fe-C martensite, lattice imaging of cementite s...
متن کامل