Improvements in a High Gain Uwb Antenna with Corrugated Edges

نویسندگان

  • Z. Wang
  • H. Zhang
چکیده

In this paper, a novel corrugated structure at the edges of the Vivaldi substrate is presented. Compared with the Vivaldi antenna without corrugated structure, the new structure has a better radiation pattern. While compared with the traditional corrugated structure, the new structure has a better front-to-back ratio (F/B ratio). Properly chosen thickness and dielectric constant of substrate ensure a relatively small size while the lower frequency is around 1GHz. A Vivaldi structure also promises high gain in ultra-wideband (UWB) range. For its planar structure, the antenna is easily fabricated with a low cost. The design of a novel Vivaldi antenna described in this paper operates from 1 GHz to more than 3 GHz with −10 dB return loss and produce the gain with a range of 7 dBi ∼ 11 dBi. The current design is one of the most ideal antennas to be used for through-wall radar.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A New Compact Ultra-wideband Linear Antenna Array for Target Detection Applications

This paper presents a low-cost compact planar microstrip-fed monopole antenna and its four-element array design for ultra-wideband (UWB) wireless communication and target detection applications, respectively, operating in the frequency span of 3 GHz to 11 GHz. A prototype was fabricated and then measured based on optimal parameters. The results of reflection coefficient (S11) and radiation patt...

متن کامل

Ultra Wideband Fabric-Based Slot Antenna on Human Body for Medical Application

In this paper a new UWB textile slot antenna has been designed with high precision. This work aimed to makecloser steps towards real wearability by investigating the possibilities of designing wearable UWB antenna wheretextile materials are used for the substrate as well as the conducting parts of the designed antenna. The antenna iscomposed of three textile layers: the top and bottom are condu...

متن کامل

UWB Planar Conical Horn-Shaped Self-Complementary Bow-Tie Antenna

An ultra-wideband (UWB) self-complementary planar bow-tie antenna (SCPBTA) is proposed. The antenna consists of a printed conical horn-shaped (CHS) radiator and a counterpart CHS slot etched on a rectangular ground plane. The printed CHS radiator is connected directly to the 50Ω microstrip line by bending the end portion of the feed line. As a result, the antenna has a simple structure which do...

متن کامل

Compact CPW-fed Circular Patch Antenna for UWB Applications

In this paper, a novel CPW-fed antenna is presented for UWB applications. The antenna mainly comprises of a simple circular patch and a modified ground plane. The inclusion of two novel symmetrical rectangular slots with inner area of 3×2.8 mm2 to the top corners of the antenna creates a new path for the current and consequently leads to the bandwidth enhancement. A rectangular stub is also ado...

متن کامل

Design of A Compact CPW-FED UWB Antenna with WiMAX and WLAN Band-Notched Characteristic Evaluated in AHP Framework

In this article, we present a new design of a coplanar waveguide fed (CPW-fed) ultra-wideband (UWB) antenna with dual band-notched characteristics. Two notched frequency bands are achieved by using two inverted U-shaped stepped impedance resonators. The proposed antenna can operate from 2.82 to 11 GHz (118%), defined by VSWR< 2, except two notched bands around 3.5 GHz (WiMAX) and 5.5 GHz (WLAN)...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009