One-step fabrication process of superhydrophobic green coatings
نویسندگان
چکیده
In general, creation of superhydrophobic surfaces is composed of two steps: (i) creation of a rough surface and (ii) passivation of the surface with the low surface energy molecules or coatings. Superhydrophobic properties cannot be achieved on a surface without these two essential factors fulfilled. In the present work we have demonstrated that superhydrophobic silver films on copper (Cu) substrates can be created in just a one-step process via galvanic reactions by immersing the Cu substrates in silver nitrate solution containing benzoic acid, simplifying the complexity of two different steps involved in the former method. Silver films were also fabricated using similar process without benzoic acid for comparative studies. The X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) confirmed the formation of benzoic acid incorporated silver films. Scanning electron microscopy (SEM) images showed micronano structured leaf-like and flower-like morphological features in the films prepared without and with benzoic acid, respectively. Benzoic acid incorporated flower-like silver films demonstrated water repellency as the water drops rolled off those surfaces whereas complete absorption of water drops were encountered on the leaf-like silver surfaces prepared without benzoic acid.
منابع مشابه
A facile approach to robust superhydrophobic 3D coatings via connective-particle formation using the electrospraying process.
This work demonstrates a facile fabrication method to produce superhydrophobic coatings on chemically distinct materials using the electrospraying process. Coatings are mechanically robust, three-dimensional, and formed using a single fabrication step.
متن کاملA facile layer-by-layer deposition process for the fabrication of highly transparent superhydrophobic coatings.
A facile layer-by-layer deposition process is developed to fabricate highly-transparent superhydrophobic coatings, which comprise the underlying antireflective nanoporous silica layer and the top transparent superhydrophobic SiO(2) nanoparticle layer.
متن کاملReproducing superhydrophobic leaves as coatings by micromolding surface-initiated polymerization.
Micromolding surface-initiated polymerization enables the fabrication of polymer coatings that reproduce the microscale surface topography of superhydrophobic leaves onto solid supports. Here, the surfaces of superhydrophobic leaves from Trifolium repens and Aristolochia esperanzae are molded and reproduced as the topography of a partially fluorinated polymer coating through the surface-initiat...
متن کاملBioinspired, roughness-induced, water and oil super-philic and super-phobic coatings prepared by adaptable layer-by-layer technique
Coatings with specific surface wetting properties are of interest for anti-fouling, anti-fogging, anti-icing, self-cleaning, anti-smudge, and oil-water separation applications. Many previous bioinspired surfaces are of limited use due to a lack of mechanical durability. Here, a layer-by-layer technique is utilized to create coatings with four combinations of water and oil repellency and affinit...
متن کاملMultifunctional superhydrophobic polymer/carbon nanocomposites: graphene, carbon nanotubes, or carbon black?
Superhydrophobic surfaces resisting water penetration into their texture under dynamic impact conditions and offering simultaneously additional functionalities can find use in a multitude of applications. We present a facile, environmentally benign, and economical fabrication of highly electrically conductive, polymer-based superhydrophobic coatings, with impressive ability to resist dynamic wa...
متن کامل