Piezoelectric Polymeric Thin Films Tuned by Carbon Nanotube Fillers
نویسندگان
چکیده
Piezoelectric materials have received considerable attention from the smart structure community because of their potential use as sensors, actuators and power harvesters. In particular, polyvinylidene fluoride (PVDF) has been proposed in recent years as an enabling material for a variety of sensing and energy harvesting applications. In this study, carbon nanotubes (CNT) are included within a PVDF matrix to enhance the properties of PVDF. The CNTPVDF composite is fabricated by solvent evaporation and melt pressing. The inclusion of CNT allows the dielectric properties of the PVDF material to be adjusted such that lower poling voltages can be used to induce a permanent piezoelectric effect in the composite. To compare the piezoelectric characteristics of the CNT-PVDF composite proposed, scanning electron microscope (SEM) images were analyzed and ferroelectric experiments were conducted. Finally, the aforementioned composites were mounted upon the surface of a cantilevered beam to compare the voltage generation of the CNT-PVDF composite against homogeneous PVDF thin films.
منابع مشابه
Carbon Nanotubes Based Thin Films: Fabrication, Characterization and Applications
Composite thin films based on carbon nanotubes have received immense attention which is attributed to their distinct mechanical, thermal, optical and structure properties. Depending on the film compositions and preparation methods, carbon nanotube based thin films can be tuned for various applications in many fields. In this comprehensive review paper, we overview the recent methods for the fab...
متن کاملCharacterizing the Conductivity and Enhancing the Piezoresistivity of Carbon Nanotube-Polymeric Thin Films
The concept of lightweight design is widely employed for designing and constructing aerospace structures that can sustain extreme loads while also being fuel-efficient. Popular lightweight materials such as aluminum alloy and fiber-reinforced polymers (FRPs) possess outstanding mechanical properties, but their structural integrity requires constant assessment to ensure structural safety. Next-g...
متن کاملViscoelasticity in carbon nanotube composites.
Polymer composites reinforced by carbon nanotubes have been extensively researched for their strength and stiffness properties. Unless the interface is carefully engineered, poor load transfer between nanotubes (in bundles) and between nanotubes and surrounding polymer chains may result in interfacial slippage and reduced performance. Interfacial shear, although detrimental to high stiffness an...
متن کاملUltra-stretchable and skin-mountable strain sensors using carbon nanotubes-Ecoflex nanocomposites.
Super-stretchable, skin-mountable, and ultra-soft strain sensors are presented by using carbon nanotube percolation network-silicone rubber nanocomposite thin films. The applicability of the strain sensors as epidermal electronic systems, in which mechanical compliance like human skin and high stretchability (ϵ > 100%) are required, has been explored. The sensitivity of the strain sensors can b...
متن کاملSurface Stress Effect on the Nonlocal Biaxial Buckling and Bending Analysis of Polymeric Piezoelectric Nanoplate Reinforced by CNT Using Eshelby-Mori-Tanaka Approach
In this article, the nonlocal biaxial buckling load and bending analysis of polymeric piezoelectric nanoplate reinforced by carbon nanotube (CNT) considering the surface stress effect is presented. This plate is subjected to electro-magneto-mechanical loadings. Eshelby-Mori-Tanaka approach is used for defining the piezoelectric nanoplate material properties. Navier’s type solution is employed t...
متن کامل