Solid Particle Erosion of Thermal Sprayed Coatings
نویسنده
چکیده
Solid particle erosion is an important material degradation mechanism. Although various methods of coating are tried and used for protection against erosion, thermal sprayed coating for such purpose is the most widely used method. In this chapter, evolution of thermal sprayed coating, erosion testing methods, and erosive wear of thermal sprayed coatings are discussed extensively with emphasis on recent developments. It is generally found that erosion of thermal sprayed coatings depends on erosion test conditions, microstructural features, and mechanical properties of the coating materials. Most thermal sprayed coatings respond in brittle manner having maximum erosion rate at oblique impact and velocity exponent in excess of 3.0. Erosion rate is also dependent on thermal spraying techniques and post coating treatment. However, little work is done on dependence of erosion rate on coating techniques and coating conditions. Future direction of work is also reported. S. G. Sapate Visvesvaraya National Institute of Technology, India Manish Roy Defence Metallurgical Research Laboratory, India Solid Particle Erosion of Thermal Sprayed Coatings
منابع مشابه
Numerical modeling the bonding mechanism of HVOF sprayed particles
During high velocity oxy-fuel (HVOF) thermal spraying, most powder particles remain in solid state prior to the formation of coating. A finite element (FE) model is developed to study the impact of thermally sprayed solid particles on substrates and to establish the critical particle impact parameters needed for adequate bonding. The particles are given the properties of widely usedWC-Co powder...
متن کاملThermal Conductivity Analysis and Lifetime Testing of Suspension Plasma-Sprayed Thermal Barrier Coatings
Suspension plasma spraying (SPS) has become an interesting method for the production of thermal barrier coatings for gas turbine components. The development of the SPS process has led to structures with segmented vertical cracks or column-like structures that can imitate strain-tolerant air plasma spraying (APS) or electron beam physical vapor deposition (EB-PVD) coatings. Additionally, SPS coa...
متن کاملBonding Mechanism from the Impact of Thermally Sprayed Solid Particles
Power particles are mainly in solid state prior to impact on substrates from high velocity oxyfuel (HVOF) thermal spraying. The bonding between particles and substrates is critical to ensure the quality of coating. Finite element analysis (FEA) models are developed to simulate the impingement process of solid particle impact on substrates. This numerical study examines the bonding mechanism bet...
متن کاملA Review on Detonation Gun Sprayed Coatings
Materials are precious resources. Different methods are employed to protect the material from degradation. Thermal spraying is one of the most effective method to protect the material from wear, high temperature corrosion, stresses and erosion, thus increasing the life of material in use. Detonation gun spraying is one of the thermal spraying techniques known for providing hard, wear resistant ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015