Emerging Signal Processing Techniques for Power Quality Applications
نویسندگان
چکیده
1Department of Electrical Circuit, Federal University of Juiz de Fora, CEP 36036-330 Juiz de Fora, Brazil 2Department of Electrical Engineering, Pontifical Catholic University of Rio de Janeiro, CEP 22453-900 Rio de Janeiro, Brazil 3The Edward S. Rogers SR., Department of Electrical and Computer Engineering, University of Toronto, Toronto, ON, Canada M5S 3G4 4Department of Signals and Systems, Chalmers University of Technology, SE-412 96 Gothenburg, Sweden 5C. V. Raman, College of Engineering Bhubaneswar, Utkal University, Bhubaneswar 751024, Orissa, India 6Department of Electrical Engineering, University of Washington, Seattle, WA 98195-2500, USA
منابع مشابه
A New High Frequency Grid Impedance Estimation Technique for the Frequency Range of 2 to150 kHz
Grid impedance estimation is used in many power system applications such as grid connected renewable energy systems and power quality analysis of smart grids. The grid impedance estimation techniques based on signal injection uses Ohm’s law for the estimation. In these methods, one or several signal(s) is (are) injected to Point of Common Coupling (PCC). Then the current through and voltage of ...
متن کاملGrid Impedance Estimation Using Several Short-Term Low Power Signal Injections
In this paper, a signal processing method is proposed to estimate the low and high-frequency impedances of power systems using several short-term low power signal injections for a frequency range of 0-150 kHz. This frequency range is very important, and thusso it is considered in the analysis of power quality issues of smart grids. The impedance estimation is used in many power system applicati...
متن کاملDesign and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE)
Radar Signal Processing has been an interesting area of research for realization of programmable digital signal processor using VLSI design techniques. Digital Signal Processing (DSP) algorithms have been an integral design methodology for implementation of high speed application specific real-time systems especially for high resolution radar. CORDIC algorithm, in recent times, is turned out to...
متن کاملLow power design for DSP: methodologies and techniques
Power dissipation is becoming a limiting factor in the realization of VLSI systems. The principal reasons for this are maximum operating temperature and, for portable applications, battery life. Because of the relatively greater complexity, the power dissipation in digital signal processing (DSP) applications is of special significance, and low power design technique,'; are now emerging. This p...
متن کاملAutomatic Detection and Localization of Surface Cracks in Continuously Cast Hot Steel Slabs Using Digital Image Analysis Techniques
Quality inspection is an indispensable part of modern industrial manufacturing. Steel as a major industry requires constant surveillance and supervision through its various stages of production. Continuous casting is a critical step in the steel manufacturing process in which molten steel is solidified into a semi-finished product called slab. Once the slab is released from the casting unit, th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- EURASIP J. Adv. Sig. Proc.
دوره 2007 شماره
صفحات -
تاریخ انتشار 2007