Early compressive strength and phase-formation of dental amalgam.
نویسندگان
چکیده
The compressive strength of five different amalgams was measured at one hour, six hours, 24 hours, and seven days, and X-ray diffraction analysis was carried out for each amalgam at the same times in order to investigate the early strength characteristics of the amalgams in relation to the formation of different phases. At 24 hours all tested amalgams reached about 90% or more of their seven-day compressive strength, but the increase in the early compressive strength from one hour to 24 hours varied between different amalgams. Two of the five amalgams tested reached about 90% of their seven-day compressive strength at six hours. A significant correlation was found between the ratio of early compressive strength to seven-day compressive strength, and the X-ray diffraction intensity ratio (ratios of one-, six- and 24 hour intensity to seven-day intensity) for the gamma 1 phase, indicating that the increases in early compressive strength are mainly dependent upon the formation of gamma 1.
منابع مشابه
Effect of diode laser irradiation on compressive strength of dental amalgam
INTRODUCTION One of the biggest disadvantages of dental amalgam is that gaining its ultimate strength is a slow process. The use of a rapid-setting amalgam with high early compressive strength could be a better option in preventing early fractures in pediatric dentistry. The aim of this study was to determine the effect of diode laser irradiation on compressive strength of dental amalgam. MET...
متن کاملINVESTIGATING THE PHYSICAL AND MECHANICAL PROPERTIES OF HIGH-COPPER AND SILVER DENTAL-FILLING AMALGAM ALLOYS
Abstract: The aim of the present investigation is to study the physical and mechanical characteristics of dental-filling spherical high-copper and silver amalgams and to compare them with a common high-copper domestic unicompositional amalgam. In this study, cylindrical specimens were mechanically condensed according to the ISO 1559:1986 Standard in order to measure the compressive strength, Vi...
متن کاملTHE EFFECT OF ADDING TiO2 NANOPARTICLES ON DENTAL AMALGAM PROPERTIES
Abstract:In recent years, there have been many attempts to improve the properties of dental amalgam. The aim of the present investigation was fabrication and characterization of dental amalgams containing TiO2 nanoparticles and evaluation of their compressive strength, antibacterial and corrosion behavior. In this experimental research, TiO2 nanoparticles (TiO2 NPs) were added to reference amal...
متن کاملEvaluation of Shears Strength of Dowel Amalgam and Post-amalgam in Root Canal-treated Teeth
Introduction: Amalgam, which can be applied with or without dowel, is one of the commonly used restorative materials for core restoration in pulpless teeth. The current study aimed to compare the shear strength of amalgam cores with and without dowel. Methods: A total number of 20 recently extracted mandibular premolars were assigned to two groups of 10 equal s...
متن کاملCompressive Properties of Enamel , Dental Cements , and Gold
The compressive properties of human enamel and dentin have been reported by Stanford, Paffenbarger, Kumpula, and Sweeney.' The elastic modulus of occlusal, side, and cusp enamel was reported to be 1.8, 6.0, and 8.2 X 106 psi, respectively. The corresponding values for the proportional limit were 16,800, 21,000, and 34,200 psi and, for the compressive strength, 19,400, 28,300, and 40,200 psi. An...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Dental materials journal
دوره 14 2 شماره
صفحات -
تاریخ انتشار 1995