A Compact Printed Antenna For Wimax, Wlan & C Band Applications

نویسنده

  • Barun Mazumdar
چکیده

Abstract: A single feed compact microstrip antenna is proposed in this paper. One L slit & one H slit are introduced on the right edge of the patch to study the effect of the slit on radiation behaviour with respect to a conventional microstrip patch. An extensive analysis of the return loss, radiation pattern and efficiency of the proposed antenna is shown in this paper. For the optimize value of the slit parameters antenna resonant frequencies are obtained at 2.53, 4, 5.73 & 7.54 GHz with corresponding bandwidth 12.48 MHz, 37.97 MHz, 80.68 MHz , 230.67 MHz and return loss of about -17.4, -32.5, -12.4 & -29.7 dB respectively. The antenna size has been reduced by 75% when compared to a conventional microstrip patch. The characteristics of the designed structure are investigated by using MoM based electromagnetic solver, IE3D. The simple configuration and low profile nature of the proposed antenna leads to easy fabrication and make it suitable for the applications in Wireless communication system. Mainly it is developed to operate in the WiMAX & WLAN application.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Multi Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)

A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...

متن کامل

An Improved CPW-Fed Printed UWB Antenna With Controllable Band-notched Functions

A newly designed printed slot antenna is presented that incorporates variable two band-notched functions for ultra-wideband (UWB) applications. The two band notches of this coplanar waveguide (CPW) fed antenna are achieved by an M-shaped slot (MSS) embedded in the radiating element and a C-shaped strip (CSS) close to ground plane, therefore two very narrow rejected properties in the wireless lo...

متن کامل

Design of A Compact CPW-FED UWB Antenna with WiMAX and WLAN Band-Notched Characteristic Evaluated in AHP Framework

In this article, we present a new design of a coplanar waveguide fed (CPW-fed) ultra-wideband (UWB) antenna with dual band-notched characteristics. Two notched frequency bands are achieved by using two inverted U-shaped stepped impedance resonators. The proposed antenna can operate from 2.82 to 11 GHz (118%), defined by VSWR< 2, except two notched bands around 3.5 GHz (WiMAX) and 5.5 GHz (WLAN)...

متن کامل

A New Compact Microstrip-Fed Monopole Antenna for Triple Band WLAN/WiMAX Applications

A new compact printed tri-band antenna for WLAN/WiMAX applications is presented. The proposed antenna consists of three inverted L-shaped strips whose geometry looks like a “bent fork”. These strips are attached to the feed line through a horizontal strip. By optimizing the geometries of the inverted L-shaped strips, distinct resonant points can be effectively created for different frequency ba...

متن کامل

A Compact Dual-Band Printed Monopole Antenna for WiMAX/WLAN Applications

A compact printed dual-band antenna for WiMAX/WLAN applications is proposed in this paper. The dual-band monopole antenna consists of a triangular patch and two folding arms shorted to the ground plane. The proposed antenna features a low profile and compact dimension. To avoid via process in the fabrication, the triangular patch and two folding arms are separately constructed on the two sides ...

متن کامل

A Novel Small E–Ring Shaped Monopole Antenna with Dual Band-Notch Function for UWB Wireless Communications

This paper presents an E-ring shaped printed monopole antenna for UWB applications with dual notched bands performance. In order to generate single frequency band notch function, we applied a U-ring shaped monopole antenna, and by inserting a rectangular ring in the centre of it an E-ring shaped radiating patch created and a dual band-notch function can be achieved. The measured bandwidth of th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012