Wear Analysis during End Milling AISI 1018 Steel Using Microlubrication
نویسندگان
چکیده
Microlubrication minimizes the exposure of metal working fluids (MWFs) leading to an economical, safer and healthy workplace environment. In this study vegetable based lubricant is used to conduct wear analysis during end milling AISI 1018 steel using microlubrication. Solid carbide cutting tool was used with varying cutting speed and feed rate having a constant depth of cut. A full factorial experiment was conducted and regression models were generated for the tool flank wear. Higher tool life was observed in the lowest cutting speed and feed rate combination. The study shows that with a proper selectionof the cutting parameters it is possible to obtain higher tool life.
منابع مشابه
Microlubrication effects in milling AISI 1018 steel:An approach towards Green Manufacturing
Flood cooling is primarily used to cool and lubricate the cutting tool and workpiece interface during machining process. The adverse health effects caused by the use of coolants and the potential economic advantages of greener machining methods are drawing manufacturer’s attention to adapt and develop new methods of using lubricants. Microlubrication serves as an alternative to flood cooling by...
متن کاملParametric Optimization of End Milling Of AISI 1018 Mild Steel by Various Lubricants with Solid Carbide End Mills
This study investigated the optimization of End milling of AISI 1018mild steel by various lubricants using the Grey relational analysis method. Quaker 7101, Blasocut strong 4000 and Velvex have been selected as lubricant. All the experiment are carried out at different cutting parameter (Number of Tool Flutes, Depth of cut, Spindle speed and Feed rate) in various lubricant assisted environment....
متن کاملCutting Force Prediction in End Milling Process of AISI 304 Steel Using Solid Carbide Tools
In the present study, an attempt has been made to experimentally investigate the effects of cutting parameters on cutting force in end milling of AISI 304 steel with solid carbide tools. Experiments were conducted based on four factors and five level central composite rotatable design. Mathematical model has been developed to predict the cutting forces in terms of cutting parameters such as he...
متن کاملOptimization of the Cutting Fluids and Parameters Using Taguchi and ANOVA in Milling
In this study, two different vegetable based cutting fluids developed from refined canola and sunflower oil and a commercial type semi-synthetic cutting fluid were carried out to determine optimum conditions for tool wear and forces during milling of AISI 304 austenitic stainless steel. Taguchi L9 (3) orthogonal array was used for the experiment plan. Cutting speed, feed rate, depth of cut and ...
متن کاملJoining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state welding
The joining of a 6-mm thickness Al 6061 to AISI 1018 steel has been performed by the combined effects of fusion and solid state welding. The process is derived from friction stir welding (FSW) but with an adjustable offset of the probe location with respect to the butt line. Metallographic studies by optical microscopy, electron probe microscopy, and the utilization of the X-ray diffraction tec...
متن کامل