UV-Induced Photocatalytic Cashmere Fibers

نویسندگان

  • Lingyun Wang
  • Walid A. Daoud
چکیده

Cashmere with UV-induced photocatalytic properties is developed for the first time by applying nanocrystalline anatase TiO₂ colloid that is free of inorganic acids and organic solvents via a facile low-temperature one-step sol-gel process. The coated cashmere exhibits remarkable UV-induced photodegradation of methyl orange. Furthermore, the photocatalytic nano-coating on cashmere exhibits significant stability after repetitive washing cycles without the need for chemical or physical pretreatment, where the photocatalytic activities remain almost unchanged after three washing cycles while maintaining a water contact angle above 150°. The one-step functionalization process also minimizes the impact on the peculiar intrinsic properties of cashmere. These findings indicate that cashmere combining reproducible UV-induced photocatalytic activity with stable superhydrophobicity has potential in practical applications.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effect of Percentage of Remaining Hair Bred and Ambient Relative Humidity on Electrical Resistance of Cashmere Fiber

Among different types of controlling systems, the ON/OFF digital relative humidity control was used for measuring electrical properties of cashmere fibers to make the ambient relative humidity fixed. To achieve this goal the required hardware and software were designed and fabricated. The electrical resistance of fine and coarse hair cashmere fiber was measured by charge and discharge condenser...

متن کامل

Photocatalytic self-cleaning properties of lanthanum and silver co-doped TiO2 nanocomposite on polymeric fibers

Titania, single-doped and lanthanum-silver co-doped titania nanocomposite were coated on cellulosic and polyacrylonitrile fibers via sol–gel method. The prepared samples were evaluated using x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), photolumines...

متن کامل

Photocatalytic self-cleaning properties of lanthanum and silver co-doped TiO2 nanocomposite on polymeric fibers

Titania, single-doped and lanthanum-silver co-doped titania nanocomposite were coated on cellulosic and polyacrylonitrile fibers via sol–gel method. The prepared samples were evaluated using x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), photolumines...

متن کامل

Direct formation of reusable TiO2/CoFe2O4 heterogeneous photocatalytic fibers via two-spinneret electrospinning.

A reusable photocatalytic TiO2/CoFe2O4 composite nanofiber was directly formed by using a vertical two-spinneret electrospinning process and sol-gel method, followed by heat treatment at 550 degrees C for 2 h. The high photocatalytic activity of the composite nanofibers depends on the good morphology of the fibers and the appropriate calcination temperature. The crystal structure and magnetic p...

متن کامل

Advanced Fabrication of Chemically Bonded Graphene/TiO2 Continuous Fibers with Enhanced Broadband Photocatalytic Properties and Involved Mechanisms Exploration

In this article, a novel route for the synthesis of graphene/TiO2 continuous fibers (GTF) using force-spinning combined with water vapor annealing method is reported for the first time. The morphology, structure and optical properties of the composite were fully characterized. With a single step of heat treatment process using steam at ambient conditions, we were able to initiate a series of ch...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 10  شماره 

صفحات  -

تاریخ انتشار 2017