14th Int'l Symposium on Quality Electronic Design
نویسندگان
چکیده
Large on-chip caches account for a considerable fraction of the total energy consumption in modern microprocessors. In this context, emerging Spin-Transfer Torque RAM (STTRAM) has been regarded as a promising candidate to replace large on-chip SRAM caches in virtue of its nature of the zero leakage. However, large energy requirement of STT-RAM on write operations, resulting in a huge amount of dynamic energy consumption, precludes it from application to on-chip cache designs. In order to reduce the write energy of the STT-RAM cache thereby the total energy consumption, this paper provides an architectural technique which exploits the fact that many applications process a large number of zero data. The proposed design appends additional flags in cache tag arrays and set these additional bits if the corresponding data in the cache line is the zero-valued data in which all data bits are zero. Our experimental results show that the proposed cache design can reduce 73.78% and 69.30% of the dynamic energy on write operations at the byte and word granularities, respectively; total energy consumption reduced by 36.18% and 42.51%, respectively. In addition to the energy reduction, performance evaluation results indicate that the proposed cache improves the processor performance by 5.44% on average.
منابع مشابه
14th Int'l Symposium on Quality Electronic Design
Wireless Network-on-Chip (WiNoC) has emerged as an enabling technology to design low power and high bandwidth massive multi-core chips. The performance advantages mainly stem from using the wireless links as long-range shortcuts between far apart cores. This performance gain can be enhanced further if the characteristics of the wireline links and the processing cores of the WiNoC are optimized ...
متن کامل14th Int'l Symposium on Quality Electronic Design
This paper proposes a method to reduce the supply voltage IR drop of 3D stacked-die systems by implementing an on-chip Buck Converter on Top die (BCT) scheme. The IR drop is caused by the parasitic resistance of Through Silicon Vias (TSV’s) used in the 3D integration. The IR drop reduction and the overhead associated with the BCT scheme are modeled and analyzed. A 3D stacked-die system is manuf...
متن کامل14th Int'l Symposium on Quality Electronic Design
Rapid passive device modeling is discussed in this work based on test structures fabricated in a 65 nm CMOS process with M1–M9 copper metal layers and one aluminum metal layer AP. Capacitance extraction for overlapping microstrips and shielded microstrip structures is investigated. Individual capacitances are modeled in terms of area and fringe components, either between microstrips or between ...
متن کامل10th Int'l Symposium on Quality Electronic Design
Chenyue Ma, Bo Li, Lining Zhang, Jin He, Xing Zhang, Xinnan Lin, and Mansun Chan 1 The Micro& Nano Electronic Device and Integrated Technology Group, The Key Laboratory of Integrated Microsystems, Shenzhen Graduate School of Peking University, Shenzhen, P. R .China; 2 TSRC, Key Laboratory of Microelectronic Devices and Circuits of Ministry of Education, Institute of Microelectronics, EECS, Peki...
متن کامل13th Int'l Symposium on Quality Electronic Design
Bias temperature instability (among other problems) is a key reliability issue with nanoscale CMOS transistors. Especially in sensitive circuits such as sense amplifiers of SRAM arrays, transistor aging may significantly increase the probability of failure. By analyzing the Current Based Sense Amplifier circuit and Voltage-Latched Sense Amplifier circuit through HSPICE simulations, we observe t...
متن کامل