Pitot probe corrections in fully developed turbulent pipe flow
نویسندگان
چکیده
Mean flow measurements taken in fully developed turbulent pipe flow over a wide Reynolds number range are used to evaluate current methods of correcting Pitot probe data. Based on this evaluation, a new form for the displacement correction is proposed which appears to be more accurate over a wider range of conditions than those currently available. The difficulty of obtaining the true near-wall velocity profile near the wall is explored.
منابع مشابه
Numerical Investigation of Turbulent Mass Transfer in a 90° Bend
This paper presents a numerical study of local mass transfer coefficients in a 90° bend using the RNG version of k–e model to include the influence of curvature on the turbulent transport. Simulations were performed for flow through a 90°, 3-D bend for Reynolds numbers of 13500, 90000, and 390000, Schmidt numbers of 2.53 and 700 and curvature ratios of 1.5, 2, and 2.5. The differences betwe...
متن کاملCharacterization of Chimney Flue Gas Flows Flow Rate Measurements with Averaging Pitot Probes
Performance testing methods of boilers in transient operating conditions (start, stop and combustion power modulation sequences) need the combustion rate quantified to allow for the emissions to be quantified. One way of quantifying the combustion rate of a boiler during transient operating conditions is by measuring the flue gas flow rate. The flow conditions in chimneys of single family house...
متن کاملLaminar-to-turbulent transition of pipe flows through puffs and slugs
Laminar-to-turbulent transition of pipe flows occurs, for sufficiently high Reynolds numbers, in the form of slugs. These are initiated by disturbances in the entrance region of a pipe flow, and grow in length in the axial direction as they move downstream. Sequences of slugs merge at some distance from the pipe inlet to finally form the state of fully developed turbulent pipe flow. This format...
متن کاملThe Experimental Study of Nanoparticles Effect on Thermal Efficiency of Double Pipe Heat Exchangers in Turbulent Flow
In this work, the characteristics of flow and heat transfer of a fluid containing nano particles of aluminum oxide with the water volume fraction (0.1-0.2-0.3)(V/V) percent of the reports. The overall heat transfer coefficient, heat transfer and the average heat transfer fluid containing nano water - aluminum oxide in a horizontal double pipe counter flow heat exchanger under turbulent flow con...
متن کاملSelf-similarity of Mean Flow in Pipe Turbulence
Based on our previous modi…ed log-wake law in turbulent pipe ‡ows, we invent two compound similarity numbers (Y; U), where Y is a combination of the inner variable y + and outer variable , and U is the pure e¤ect of the wall. The two similarity numbers can well collapse mean velocity pro…le data with di¤erent moderate and large Reynolds numbers into a single universal pro…le. We then propose an...
متن کامل