Effects of low central fuelling on density and ion temperature profiles in reversed shear plasmas on JT-60U
نویسندگان
چکیده
Effects of low central fuelling on density and ion temperature profiles have been investigated using negative ion based neutral beam injection and electron cyclotron heating (ECH) in reversed shear plasmas on JT-60U. Strong internal transport barrier (ITB) was maintained in density and ion temperature profiles, when central fuelling was decreased by switching positive ion based neutral beam injection to ECH after the strong ITB formation. Similar density and ion temperature ITBs were formed for the low and high central fuelling cases during the plasma current ramp-up phase. Strong correlation between the density gradient and the ion temperature gradient was observed, indicating that particle transport and ion thermal transport are strongly coupled or the density gradient assists the ion temperature ITB formation through suppression of drift wave instabilities such as ion temperature gradient mode. These results support that the density and ion temperature ITBs can be formed under reactor relevant conditions.
منابع مشابه
Dynamics of ion internal transport barrier in LHD heliotron and JT-60U tokamak plasmas
Dynamics of ion internal transport barrier (ITB) formation and impurity transport both in the Large Helical Device (LHD) heliotron and JT-60U tokamak are described. Significant differences between heliotron and tokamak plasmas are observed. The location of the ITB moves outward during the ITB formation regardless of the sign of magnetic shear in JT-60U and the ITB becomes more localized in the ...
متن کاملFormation of Internal Transport Barriers and Lts Lmpact on the Jt-60u Plasmas Ide Shunsuke+ and the Jt-60 Team
Formation of internal transport barriers (ITBs) in a plasma is a key to access to improved confinement. In JT-60U, there are two types of plasmas which are accompanied with ITB. One is a high Bo plasma and the other one is a reversed magnetic shear (RS) plasma. In RS plasmas, interesting features can be seen in spatial profiles of plasma parameters. For example, the location of the ITB can be s...
متن کاملHeat transport and pedestal structure of H-mode in the variation of current density profiles in JT-60U
Abstract. H-modes operated at higher li with the current ramp down have shown higher energy confinement with higher density in JT-60U. The H-factor evaluated for the core plasma depends strongly on li with the relation of H89core ∝ li for the case without sawtooth activities. Center peaked profiles of electron density and electron temperature are obtained in high li H-modes. While the periphera...
متن کاملCharacteristics of Internal Transport Barrier in JT-60U Reversed Shear Plasmas
Characteristics of internal transport barrier (ITB) structure are studied and the active ITB control has been developed in JT-60U reversed shear plasmas. The following results are found. Outward propagation of the ITB with steep Ti gradient is limited to the minimum safety factor location (ρqmin). However the ITB with reduced Ti gradient can move to the outside of ρqmin. Lower boundary of ITB w...
متن کاملExperimental Investigation of Particle Pinch Associated with Turbulence in LHD Heliotron and JT-60U Tokamak Plasmas
Comparative studies were carried out to elucidate the most essential parameter(s) for control of density profiles in LHD heliotron and JT-60U tokamak plasmas. Different collisionality dependence was found between two devices. Change of fluctuation property was observed at different density profile in both devices in plasma core region. In JT-60U, increase of radial correlation length was observ...
متن کامل