Monocrystalline CdTe solar cell with ultra-high open-circuit voltage and substantially increased efficiency
نویسندگان
چکیده
We report the demonstration of CdTe/MgxCd1-xTe double heterostructures (DHs) with a carrier lifetime of 3.6 μs and an interface recommendation velocity of 1.2 cm/s, comparable to or even better than the best values reported for GaAs/Al0.5Ga0.5As (18 cm/s) and GaAs/Ga0.5In0.5P (1.5 cm/s) DHs. Combined with a p-contact layer (8 nm a-SiCy:H + 4 nm a-Si:H), devices consisting of MgxCd1-xTe/CdTe/Mg0.24Cd0.76Te DHs have demonstrated an efficiency of 14.66% ± 1.4% with a Voc of 0.9954 V ± 0.3% certified by NREL. The maximum certified Voc is 1.0542 V ± 0.5%. Additional measurements reveal that the best tested device has a Voc of 1.036 V, a Jsc of 22.3 mA/cm, a fill-factor of 73.6%, and a power conversion efficiency of 17.0%. The maximum Voc measured from these devices is 1.096 V. All these device characteristics are substantially greater than the previous records for Voc (0.892 V) and efficiency (13.4%).
منابع مشابه
The Effect of Change the Thickness on CdS/CdTe Tandem Multi-Junction Solar Cells Efficiency
Researchers in the field of simulation have been mainly interested in the question of how to increase the efficiency of solar cells. Therefore this study aimed to investigate CdS/CdTe solar cells by applying AMPS-1D software. The impact of semiconductor layers thickness on the output parameters of the CdS/CdTe solar cell is being analyzed and studied carefully, for example, fill factor, effici...
متن کاملDesign of ARC less InGaP/GaAs DJ solar cell with high efficiency
In this work, we used the Atlas Tcad Silvaco software to investigate the effect of adding an additional BSF layer on the performance of InGap / GaAs dual junction solar cells with a hetero tunnel Al0.7Ga0.3As-In0.49Ga0.51P junction. These analyzes indicate that, the addition of a BSF layer to the bottom cell the increase in the thickness of the BSF top cell would reduce the recombination and in...
متن کاملOptimization of High-Efficiency CdS/CdTe Thin Film Solar Cell Using Step Doping Grading and Thickness of the Absorption Layer
In this paper, the influence of stepped doping of the absorber layer on performance of Cadmium Sulfide/Cadmium Telluride (CdS/CdTe) solar cell has been investigated. At first, the electrical characteristics of conventional CdS/CdTe solar cell is validated with fabricated CdS/CdTe solar cell. To improve the maximum efficiency of CdS/CdTe solar cell, the doping and thickness of the absorption lay...
متن کاملEffects of Sensitization with Natural Pigments on the Performance of Dye-sensitized Solar Cell (DSSC)
Three natural pigments including wild iris, black pomegranate bark and black grapes were used as sensitizer in dye sensitized solar cells (DSSCs) based on TiO2 nanoparticles. The results showed that the DSSC made of black pomegranate bark was more efficient than the other cells due to its strong bonding with TiO2 nanoparticles. Longer electron lifetime, lower electron recombination, and lower...
متن کاملNumerical dataset for analyzing the performance of a highly efficient ultrathin film CdTe solar cell
The article comprises numerical data of distinct semiconductor materials applied in the sketch of a CdTe absorber based ultrathin film solar cell. Additionally, the contact layer parametric values of the cell have been described also. Therefore, the simulation has been conducted with data related to the hetero-structured (n-ZnO/n-CdS/p-CdTe/p-ZnTe) semiconductor device and a J-V characteristics...
متن کامل