A 2.5 V 10 bit SAR ADC
نویسندگان
چکیده
Presented here is a lObit SAR ADC working over a wide supply range of 5.W to 2.W. The circuit is built in a CMOS process with Metal-Poly capacitors. Issues related to low voltage sampling circuitry design and low voltage high speed comparator design are discussed. Silicon evaluation results are presented.
منابع مشابه
A 12 bit 76MS/s SAR ADC with a Capacitor Merged Technique in 0.18µm CMOS Technology
A new high-resolution and high-speed fully differential Successive Approximation Register (SAR) Analog to Digital Converter (ADC) based on Capacitor Merged Technique is presented in this paper. The main purposes of the proposed idea are to achieve high-resolution and high-speed SAR ADC simultaneously as well. It is noteworthy that, exerting the suggested method the total capacitance and the rat...
متن کاملDesign and Implementation of a 10-bit SAR ADC with A Programmable Reference
This paper presents the development of a 38.5 kS/s 10-bit programmable reference SAR ADC which is in MIMOS’s 0.35 μm CMOS process. The design uses a resistive DAC, a dynamic comparator with pre-amplifier and logic to create 10 effective bits ADC. A programmable reference circuitry allows the ADC to operate with different input ra 0.6 V to 2.1 V. The ADC consumed less than 7.5 mW power with a 3 ...
متن کاملTwo-Step Single Slope/SAR ADC with Error Correction for CMOS Image Sensor
Conventional two-step ADC for CMOS image sensor requires full resolution noise performance in the first stage single slope ADC, leading to high power consumption and large chip area. This paper presents an 11-bit two-step single slope/successive approximation register (SAR) ADC scheme for CMOS image sensor applications. The first stage single slope ADC generates a 3-bit data and 1 redundant bit...
متن کاملDesign and Implementation of Sub Modules of Successive Approximation Register A/D Converter
Abstract — This paper describes the implementation of a 8-bit 50 MS/s SAR ADC using 180nm TSMC CMOS VLSI Process in Mentor Graphics. Here main building blocks of SAR ADC lik e comparator, sample and hold, SAR Register and DAC are implemented. The supply voltage for this SAR ADC is ±1.8 V. The simulation result shows speed of 50 MHz achieved with input frequency of 1 MHz and power dissipation of...
متن کاملA 10-bit 100-kS/s Successive Approximation Register ADC with improved Split Capacitor-based DAC
A 10-bit 100-kS/s successive approximation register (SAR) analogto-digital converter (ADC) with rail-to-rail input range is proposed for a low power sensor interface. It consists of a time-domain comparator, a split capacitor-based digital-to-analog converter (SC-DAC) and a SAR logic. The time-domain comparator with an offset calibration technique is used to achieve a resolution of 10-bit. To r...
متن کامل