Local conductivity and surface photovoltage variations due to magnesium segregation in p-type GaN
نویسندگان
چکیده
Conductive atomic force microscopy ~C-AFM! and surface photovoltage ~SPV! microscopy were used to investigate local electronic structure in p-type GaN. C-AFM imaging revealed locally reduced forwardand reverse-bias conductivity near threading dislocations. In addition, regions near threading dislocations demonstrated significantly enhanced surface photovoltage response when compared to regions away from dislocations. Analytical treatment of the surface photovoltage as a function of pertinent material properties indicated that reduced background dopant concentration is the most likely cause for the increased SPV. Both reduced conductivity and enhanced surface photovoltage are shown to be consistent with Mg segregation to dislocation cores that results in regions of locally decreased electrically active Mg concentration surrounding the dislocations. © 2004 American Institute of Physics. @DOI: 10.1063/1.1713025#
منابع مشابه
Electrical and surface composition properties of phosphorus implantation in Mg-doped GaN
Changes in electrical as well as surface composition such as chemical and electronic properties of Mg-doped p-type GaN by phosphorus implanting are systematically investigated using Hall effect and X-ray photoelectron spectroscopy (XPS) measurements. It is shown that p-type conductivity of Mg-doped GaN can be improved by implanting P atoms after a proper post-implantation annealing treatment, p...
متن کاملIMPURITY DECORATION OF NATIVE VACANCIES IN Ga AND N SUBLATTICES OF GALLIUM NITRIDE
The e ects of impurity atoms as well as various growth methods to the formation of vacancy type defects in gallium nitride (GaN) have been studied by positron annihilation spectroscopy. It is shown that vacancy defects are formed in Ga or N sublattices depending on the doping of the material. Vacancies are decorated with impurity atoms leading to the compensation of the free carriers of the sam...
متن کاملEvaluation of microstructure and hardness in repair with OAW method in copper DHP moulds
The surface of continuous casting moulds with high number of castings may be worn or destructed. As result, an approach for increasing these moulds life is necessary. In this project, the goal is the restoration of the DHP copper sample. In this project, the destruction of the copper sample is done by creation of groove using a CNC machine. The restoration of the sample is done using OAW and fi...
متن کاملEvaluation of microstructure and hardness in repair with OAW method in copper DHP moulds
The surface of continuous casting moulds with high number of castings may be worn or destructed. As result, an approach for increasing these moulds life is necessary. In this project, the goal is the restoration of the DHP copper sample. In this project, the destruction of the copper sample is done by creation of groove using a CNC machine. The restoration of the sample is done using OAW and fi...
متن کاملBand bending and photoemission-induced surface photovoltages on clean n- and p-GaN „0001... surfaces
Photoelectron spectroscopy ~PES! has been used to measure the dependence of core-level shifts on temperature T and source intensity for the clean ~0001! surfaces of pand n-GaN grown by metalorganic chemical vapor deposition. In the dark, the Fermi level at the surface occurs 2.55 eV above the valence band maximum for both carrier types. The surface photovoltage ~SPV! induced by laboratory PES s...
متن کامل