Buckling and Postbuckling Behavior of Laminated Composite Plates With a Cutout
نویسنده
چکیده
منابع مشابه
Buckling and Postbuckling of Concentrically Stiffened Piezo-Composite Plates on Elastic Foundations
This research presents the modeling and analysis for the buckling and postbuckling behavior of sandwich plates under thermal and mechanical loads. The lay-up configurations of plates are laminated composite with concentric stiffener and surface mounted piezoelectric actuators. The plates are in contact with a three-parameter elastic foundation including softening and/or hardening nonlinearity. ...
متن کاملBuckling analysis of quasi-isotropic symmetrically laminated rectangular composite plates with an elliptical/circular cutout subjected to linearly varying in-plane loading using fem
In this paper the effects of circular and elliptical cutout on the buckling behavior of a sixteen ply quasi-isotropic graphite/epoxy symmetrically laminated rectangular composite plate [0°/+45°/45°/90°]2s, subjected to various linearly varying in-plane compressive loads, numerically. Further, this paper addresses the effects of size of elliptical cutout, orientation of elliptical cutout, plate ...
متن کاملPost-buckling Analysis of Composite Plates Containing Embedded Delamination with Arbitrary Shape by Using Higher Order Shear Deformation Theory
The presence of the delamination causes reductions in the bending stiffness which in turn leads to the undesirable loss in the compressive buckling and post-buckling strength. Thus, it is of chief importance to investigate the compressive behavior of composites with delaminations. Anastasiadis et al. analyzed the buckling and postbuckling behavior of delaminated composite laminates with a throu...
متن کاملCompressional Stability Behavior of Composite Plates with Multiple Through-the-Width Delaminations
In this paper, the compressive behavior of composite laminates with multiple through-the-width delaminations is investigated analytically. The analytical method is based on the CLPT theory and its formulation is developed on the basis of the Rayleigh-Ritz approximation technique to analyze the buckling and post-buckling behavior of the delaminated laminates. The method can handle both local buc...
متن کاملBuckling Analysis of Rectangular Laminated Composite Plates With An Edge Delamination Under Compressive Load
The buckling analysis of rectangular laminated composite plates with an edge delamination under in-plane compressive loading is performed using the finite element method. Such a plate may be considered as a simplified model of stiffener plates of a stiffened panel. The buckling load and buckling mode are obtained by solving an eigenproblem. In an unconstrained analysis, physically inadmissible ...
متن کامل