FTIR Study of Enhanced Polymeric Blend Membrane with Amines
نویسندگان
چکیده
In this study, research will be carried out to identify the functional group behavior of glassy and rubbery polymeric blend membrane with amines. Polymeric blend membranes with different blending ratios were prepared and the developed membranes were characterized by FTIR to see the effect of blend ratio on different functional groups. The developed membranes are flat dense sheet membrane of 20% wt/wt. The pure and blend membrane polysulfone, polyethersulfone, polyvinyl acetate with different composition, with 10% methyl diethanol amine, mono ethanol amine, diethanol amine are developed with dimethyl acetamide solvent. Fourier Transform Infrared (FTIR) spectroscopy was utilized to study the interaction between two polymers and to analyze the type of bonding present. To observed frequencies were assigned to various mode of vibration in terms of fundamentals and combination. These spectral changes indicated the existence of molecular interaction among the enhanced polymeric blends; highlight the compatible nature among each other.
منابع مشابه
Mathematical Modeling of Carbon Dioxide Removal from the CO2/CH4 Gas Mixture Using Amines and Blend of Amines in Polypropylene: A Comparison between Hollow Fiber Membrane Contactor and Other Membranes
In this work, a mathematical model is established to describe the removal of CO2 from gaseous mixtures including CH4 and CO2 in a polypropylene hollow fiber membrane contactor in the presence of conventional absorbents such as monoethanolamine (MEA), methyldiethanolamine (MDEA), and a blend of them. Modeling was performed in axial and radial directions under the fully-wet condition for counterc...
متن کاملSupporting Polyvinylchloride Polymeric Blend Membrane with Coated Woven Fabric
Blend reverse osmosis membranes were fabricated using polyvinyl chloride (PVC) with cellulose acetate (CA) as polymer blends. Tetrahydrofuran (THF) and N-Methyl-2-pyrrolidone (NMP) were used as solvents. The membrane polymer solution was cast on a coated woven fabric support material. The prepared membranes have been characterized by SEM and mechanical properties. SEM r...
متن کاملFABRICATION AND EVALUATION OF PHYSICALLY CROSSLINKED STIMULI SENSITIVE POLYMERIC BLEND OF PVA-GELATIN AS DRUG DELIVERY SYSTEM BY FREEZE THAW CYCLES
Vacuum dried Metronidazole hydrochloride (MTZ) loaded Crosslinked polymeric blend of Poly(vinyl)alcohol (PVA) and Gelatin(GE) in different ratios by 30 freeze/thaw cycles (FTC) tested for stimuli sensitivity and crosslinking at various pH, temperature, ionic concentration and oscillatory test along with dye absorption test showed maximum swelling in alkaline pH and decreased swelling with incre...
متن کاملSeparation Efficiency of Epoxified-Polyethersulfone Blend Membrane for Chromium Removal
A microporous bisphenol A diglycidyl ether (DGEBA) epoxified-polyethersulfone (PES) blend membrane (EPES membrane) was prepared through dry-wet phase inversion. This study attempts to correlate the changes in membrane physical and chemical properties when the EPES membranes were exposed to different durations of dry-phase inversion, towards the separation efficiency of carcinogen chromium (VI)....
متن کاملStudy on the fouling behavior of HDPE/PE-g-MA/EVA blend membrane fabricated via thermally induced phase separation method
In this study, neat HDPE and HDPE/PE-g-MA/EVA blend membranes were fabricated via thermally induced phase separation (TIPS) method and their fouling behaviors were examined using filtration of BSA protein. Membranes were characterized using FESEM, AFM, ATR-FTIR analyses and porosity measurement. Fouling behavior of membranes was analyzed using the resistance-in-series (RIS), classic and combine...
متن کامل