X-Ray and Neutron Diffraction with Amorphous Ti
نویسنده
چکیده
The amorphous alloys Ti 6 7 Si 3 3 , V 6 7Si 3 3 , and Cr , 7 Si 3 3 were produced by sputtering. Their structure was investigated by X-ray and neutron diffraction. X-ray diffraction showed that the structure of the three metallic glasses is not isomorphous. Neutron diffraction showed that S i -S i atomic pairs occur preferentially with distances distinctly larger than the atomic diameter of the Si atoms. For T 6 7 Si 3 3 partial pair correlation functions could be evaluated from combination of the X-ray and the neutron data. The structural results are compared with the structure of amorphous M n 7 4 S i 2 3 P 3 .
منابع مشابه
Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying
Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...
متن کاملStudy of the Atomic Structure and Phase Separation in Amorphous Si-C-N Ceramics by X-Ray and Neutron Diffraction
für Naturforschung in cooperation with the Max Planck Society for the Advancement of Science under a Creative Commons Attribution 4.0 International License. Dieses Werk wurde im Jahr 2013 vom Verlag Zeitschrift für Naturforschung in Zusammenarbeit mit der Max-Planck-Gesellschaft zur Förderung der Wissenschaften e.V. digitalisiert und unter folgender Lizenz veröffentlicht: Creative Commons Namen...
متن کاملA Diffraction Study of Amorphous S
In the present work, amorphous Sio.40Co.24No.36 samples were investigated. X-ray and neutron diffraction experiments were performed, in order to evaluate the structure factors by the method of contrast variation. The structure can be described as crosslinked Si-N-C matrices. Within these matrices SiN 4 tetrahedra are predominant. Direct Si-Si contact does not occur. We report on the short range...
متن کاملSynthesis of Nanostructure Ti-45Al-5Cr Alloy by Mechanical Alloying and Study the Effect of Cr Addition on Microstructure of TiAl Alloy
In this work, mechanical alloying was employed to produce Ti-50Al and Ti-45Al-5Cr (at%) alloys. Alloying was performed in a planetary mill and the alloying time varying from 5 to 70h. Characterization of the powder mixture was performed by X-ray diffraction (XRD), SEM analyses and DTA test, during mechanical alloying and after annealing at 1100°c in vacuum oven. The results showed, after 50h of...
متن کاملCalcium aluminates hydration in presence of amorphous SiO2 at temperatures below 90 1C
The hydration behaviour of Ca3Al2O6, Ca12Al14O33 and CaAl2O4 with added amorphous silica at 40, 65 and 90 1C has been studied for periods ranging from 1 to 31 days. In hydrated samples crystalline phases like katoite (Ca3Al2(SiO4)3 x(OH)4x) and gibbsite, Al(OH)3, were identified, likewise amorphous phases like Al(OH)x, calcium silicate hydrates, C–S–H, and calcium aluminosilicate hydrates, C–S–...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012