Pulse-drive and Capacitive Measurement Circuit for Mems Electrostatic Actuators
نویسندگان
چکیده
In this paper we present an electronic circuit for position or capacitance estimation of MEMS electrostatic actuators based on a switched capacitor technique. The circuit uses a capacitive divider configuration composed by a fixed capacitor and the variable capacitance of the electrostatic actuator for generating a signal that is a function of the input voltage and capacitive ratio. The proposed circuit can be used to actuate and to sense position of an electrostatic MEMS actuator without extra sensing elements. This approach is compatible with the requirements of most analog feedback systems and the circuit topology of pulsed digital oscillators (PDO).
منابع مشابه
Pulse-Drive and Capacitance Measurement Circuit for MEMS Electrostatic Actuators
In this paper we present an electronic circuit for position or capacitance estimation of MEMS electrostatic actuators based on a switched capacitor technique. The circuit uses a capacitive divider configuration composed by a fixed capacitor and the variable capacitance of the electrostatic actuator for generating a signal that is a function of the input voltage and capacitive ratio. The propose...
متن کاملA MEMS Capacitive Microphone Modelling for Integrated Circuits
In this paper, a model for MEMS capacitive microphone is presented for integrated circuits. The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...
متن کاملRobust Control of an Electrostatic Microelectromechanical Actuator
A continuing trend these days is the use of micro-electro-mechanical actuators with electronic circuitry to fabricate MEMS devices such as micro-switches, hard disks, optical micro-mirrors ... One of the problems with the electrostatic MEMS actuator is that when an electrical voltage is applied to these devices, the micro-actuators undergo a residual vibration before reaching their permanent po...
متن کاملA self-test and dynamics characterization circuit for MEMS electrostatic actuators
This paper presents a high-bandwidth capacitance estimation and driving circuit especially tailored for its use with MEMS electrostatic actuators. The circuit can be integrated as a part of a system comprising an electrostatic actuator to provide self-testing and failure prediction capabilities and also as a simple and low-cost actuator dynamics characterization system capable of measuring both...
متن کاملAccurate Determination of the Pull-in Voltage for MEMS Capacitive Microphone with Clamped Square Diaphragm
Accurate determination of the pull-in, or the collapse voltage is critical in the design process. In this paper an analytical method is presented that provides a more accurate determination of the pull-in voltage for MEMS capacitive devices with clamped square diaphragm. The method incorporates both the linearized modle of the electrostatic force and the nonlinear deflection model of a clamped ...
متن کامل