Development of Metastable Solidification Structures Using the Electrospark Deposition Process

نویسندگان

  • M. Brochu
  • J. G. Portillo
  • J. Milligan
چکیده

Electrospark deposition (ESD) was studied to investigate the possibility of forming non-equilibrium microstructures in Al alloy systems. The results have demonstrated that the level of supersaturation is system-dependent. The Al-10 wt% Mg system exhibited a complete supersaturation, while the Al-Si system had a supersaturation level reaching about 1wt%. The ESD process was also used to demonstrate the possibility of forming metastable intermetallics in the Al-Ni system, such as the Al9Ni2. When comparing the present results with the literature of rapid solidification of these alloys using other processes, the discrepancy between the extent of non-equilibrium microstructure obtained is believed to be associated with the formation and duration of the weld pool prior to solidification.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Formation of Cellular Structure on Metastable Solidification of Undercooled Eutectic CoSi-62 at. %

The relationship between emissivity, delay time, and surface growth for metastable solidification of CoSi-62 at. % eutectic alloys is reported from undercooling experiments conducted using electrostatic levitation. A fraction of the undercooled melt is first solidified to CoSi2 with subsequent nucleation in the mushy-zone of CoSi after an observed delay time. During this double recalescence eve...

متن کامل

Modeling Of Heat Transfer And Solidification Of Droplet/Substrate In Microcasting SDM Process

Microcasting Shape-Deposition-Manufacturing is an approach to Solid-Freeform-Fabrication (SFF) process which is a novel method for rapid automated manufacturing of near-net-shape multi-material parts with complex geometries. By this method, objects are made by sequentially depositing molten metal droplets on a substrate and shaping by a CNC tool, layer by layer. Important issues are concerned w...

متن کامل

Non-Equilibrium Solidification of Undercooled Metallic Melts

If a liquid is undercooled below its equilibrium melting temperature an excess Gibbs free energy is created. This gives access to solidification of metastable solids under non-equilibrium conditions. In the present work, techniques of containerless processing are applied. Electromagnetic and electrostatic levitation enable to freely suspend a liquid drop of a few millimeters in diameter. Hetero...

متن کامل

Metastable phase solidification in electron beam welding of dissimilar stainless steels

Electron beam welds between dissimilar stainless steels with different solidification modes were studied with a view to elucidating the role of nucleation, cooling rate and direction of dendrite growth on the tendency towards metastable phase solidification. The results are compared with the solidification behaviour of levitation melted samples. It is demonstrated that with careful design, stai...

متن کامل

Thermal Process Maps for Controlling Microstructure in Laser-Based Solid Freeform Fabrication

The ability to predict and control microstructure in laser deposited materials requires an understanding of the thermal conditions at the onset of solidification. The focus of this work is the development of thermal process maps relating solidification cooling rate and thermal gradient (the key parameters controlling microstructure) to laser deposition process variables (laser power and velocit...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011