STUDIES OF SILICON PN JUNCTION SOLAR CELLS By
نویسنده
چکیده
منابع مشابه
Numerical Simulation of CdS/CIGS Tandem Multi-Junction Solar Cells with AMPS-1D
Numerical modeling of polycrystalline thin-film solar cell serves as an imperative procedure to test the suitability of proposed physical clarification and to anticipate the effect of physical changes on cell performance. All in all, this must be conducted with only partial knowledge of input parameters. In this paper, we evaluated the numerical simulation of CdS/CIGS tandem multi junction sola...
متن کاملThe Effect of Change the Thickness on CdS/CdTe Tandem Multi-Junction Solar Cells Efficiency
Researchers in the field of simulation have been mainly interested in the question of how to increase the efficiency of solar cells. Therefore this study aimed to investigate CdS/CdTe solar cells by applying AMPS-1D software. The impact of semiconductor layers thickness on the output parameters of the CdS/CdTe solar cell is being analyzed and studied carefully, for example, fill factor, effici...
متن کاملStudy the Effect of Silicon Nanowire Length on Characteristics of Silicon Nanowire Based Solar Cells by Using Impedance Spectroscopy
Silicon nanowire (SiNW) arrays were produced by electroless method on polycrystalline Si substrate, in HF/ AgNO3 solution. Although the monocrystalline silicon wafer is commonly utilized as a perfect substrate, polycrystalline silicon as a low cost substrate was used in this work for photovoltaic applications. In order to study the influence of etching time (which affects the SiNWs length) on d...
متن کاملEnhancing Efficiency of Two-bond Solar Cells Based on GaAs/InGaP
Multi-junction solar cells play a crucial role in the ConcentratedPhotovoltaic (CPV) Systems. Recent developments in CPV concerning high powerproduction and cost effective-ness along with better efficiency are due to theadvancements in multi-junction cells. This paper presents a simulation model of thegeneralized Multi-junction solar cell and introduces a two-bond solar ...
متن کاملThermoelectric Power Generation Using Large Area pn - Junctions
A new approach to thermoelectric power generation using large area pn-junctions is presented [1]. Thermally generated electron-hole pairs are separated by the built-in potential gradient of the pn-junction. A temperature gradient applied along this pn-junction causes a flux of both carrier types from the hot to the cold region. This principle allows us to use layer structures similar to solar c...
متن کامل