Nanocomposites of silver nanoparticles embedded in glass nanofibres obtained by laser spinning.

نویسندگان

  • Belén Cabal
  • Félix Quintero
  • Luís Antonio Díaz
  • Fernando Rojo
  • Oliver Dieste
  • Juan Pou
  • Ramón Torrecillas
  • José Serafín Moya
چکیده

Nanocomposites made of non-woven glass fibres with diameters ranging from tens of nanometers up to several micrometers, containing silver nanoparticles, were successfully fabricated by the laser spinning technique. Pellets of a soda-lime silicate glass containing silver nanoparticles with varying concentrations (5 and 10 wt%) were used as a precursor. The process followed to obtain the silver nanofibres did not agglomerate significantly the metallic nanoparticles, and the average particle size is still lower than 50 nm. This is the first time that glass nanofibres containing silver nanoparticles have been obtained following a process different from electrospinning of a sol-gel, thus avoiding the limitations of this method and opening a new route to composite nanomaterials. Antibacterial efficiency of the nanosilver glass fibres, tested against one of the most common gram negative bacteria, was greater than 99.99% compared to the glass fibres free of silver. The silver nanoparticles are well-dispersed not only on the surface but are also embedded into the uniform nanofibres, which leads to a long lasting durable antimicrobial effect. All these novel characteristics will potentially open up a whole new range of applications.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Revealing the nanoparticles aspect ratio in the glass-metal nanocomposites irradiated with femtosecond laser

We studied a femtosecond laser shaping of silver nanoparticles embedded in soda-lime glass. Comparing experimental absorption spectra with the modeling based on Maxwell Garnett approximation modified for spheroidal inclusions, we obtained the mean aspect ratio of the re-shaped silver nanoparticles as a function of the laser fluence. We demonstrated that under our experimental conditions the sph...

متن کامل

Luminescence Enhancement in Eu(III)-Doped Tellurite Glass Embedded Silver Nanoparticles

Introduction of the metallic nanoparticles (NPs) in the bulk glass received a large interest due to their versatile applications. The effect of silver NPs on optical properties of the Eu3+-doped zinc tellurite glasses is presented for the first time. Glass samples are prepared by melt-quenching technique. The surface plasmon absorption bands of silver NPs are recorded in the visible ...

متن کامل

On second harmonic generation and multiphoton-absorption induced luminescence from laser-reshaped silver nanoparticles embedded in glass.

Spherical silver nanoparticles (NPs) of 30 nm diameter embedded in soda-lime glass were uniformly reshaped (elongated) after irradiation by a linearly polarised 250 fs pulsed laser operating within the NPs' surface plasmon resonance band. We observed second harmonic generation (SHG) and multiphoton-absorption-induced luminescence (MAIL) in the embedded laser-reshaped NPs upon picosecond (10 ps)...

متن کامل

Dependence of Optical and Microstructure Properties of Thiol-Capped Silver Nanoparticles Embedded in Polymeric Matrix

Thiol-capped silver nanoparticles were prepared by in situ thermal decomposition of different silver(I)-thiolates precursors in a polymeric matrix. Depending on the structure of the organic coating, contact-free distribution of metal nanoparticles or nanoparticles aggregates were achieved. The structure and morphology of nanocomposites was analyzed by Transmission Electron Microscopy (TEM), and...

متن کامل

Physio-chemical and antibacterial characteristics of pressure spun nylon nanofibres embedded with functional silver nanoparticles.

A novel and facile approach to prepare hybrid nanoparticle embedded polymer nanofibers using pressurised gyration is presented. Silver nanoparticles and nylon polymer were used in this work. The polymer solution's physical properties, rotating speed and the working pressure had a significant influence on the fibre diameter and the morphology. Fibres in the range of 60-500nm were spun using 10wt...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nanoscale

دوره 5 9  شماره 

صفحات  -

تاریخ انتشار 2013